Rear tail light, tail tidy and their removal/installation
This is more of a grip and a whinge than anything, but man do some people bodge and scarper.
I'm trying to remove the tail tidy as half the paint's flaking off and it looks terrible. So I have good intentions of respraying it and fixing the electrics that have worn through. Man, what a bodge! It appears to all be hardwired. Un-picking this is going to be a nightmare. https://farm2.staticflickr.com/1572/...cabf6d78_m.jpg https://farm2.staticflickr.com/1630/...b241465f_m.jpg First step was to get the horrible allen head bolts out that hold the tail tidy on- 3 came out ok, but one refused to budge. PlusGas on, make a brew, come back a bit later. All hail the dremmel - cut a slot, used a big screwdriver and an FBH to start the thing twisting, cut second slot to fit the screwdriver and out she comes. |
Re: Rear tail light, tail tidy and their removal/installation
keep at it, i'm the same either do it properly or don't bother. Nothing worse than finding a bodge job but once your done you know its done right.
|
All times are GMT. The time now is 03:36 AM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.