Need tools - help
Sorry to trouble you SV folk but as a fellow SV owner experience shows you are one friendly and helpful bunch of folk ;) and like me there are a number on here that have Triumphs like me too!
I need a 46mm socket for the rear wheel nut of my Daytona but I've searched high and low (it seems) but can't find anyone that stocks them. Any ideas anyone? |
Re: Need tools - help
46mm? i struggled to get a 32 for my sprocket
there is 46mm sockets on ebay £8 http://search.ebay.co.uk/search/sear...ket&category0= |
Re: Need tools - help
Although you'll probably find they are all 3/4" drive, I use a old 1/2" socket and grind it down square, then press fit it into the 3/4" hole.
Cheers Mark. |
Re: Need tools - help
Quote:
Quote:
:p |
Re: Need tools - help
I'll ask the engineers at our place tomorrow, chances are we'll have one.
If we do i'll drop you a pm, worm in nam so it wont be too diffilt to drop off :D |
Re: Need tools - help
Got one from Halfords for the rear wheel nut on my 748 (46mm).. they stock an imperial impact socket thats close enough.. an it's 1/2" drive, can't remember the exact size though.. biggest one they had on the shelf ;)
|
Re: Need tools - help
Quote:
Thanks for the thought and effort though much appreciated. Thanks all for responses.:D |
Re: Need tools - help
;) your welcome;)
|
All times are GMT. The time now is 07:48 PM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.