Alternative balancing tool !
After reading /studying the many posts on tuning / balancing carbs, I have the chance to borrow one of the 'snail' type carb air flow gizmo's, the type that has a conical end that can be pushed into the 'trumpet' /inlet when motor is running and then the scale on the meter can be read at a glance. (I have seen these being used on webber 40's sidedrafts etc on cars)
So ... just wondered if anyone has tried this method of balancing on the sv ? I can't see why it wouldn't be as effective as a manometer or traditional gauges. It would certainly be a whole lot quicker and easier to do it this way that's for sure. Anyone have any views / first hand experience or pro's 'n' cons' of doing it this way? |
Re: Alternative balancing tool !
I did a quick google and if it's the sort I'm thinking of then it measures air flow in not vacuum pressure after the butterfly. The point of balancing the carbs is so the slides lift together which is down to equal vacuums that then draw the air out of the chamber above the diaphragm, so while airflow is related, I doubt it'd be accurate enough. Also the airflow at tickover is quite small.
|
Re: Alternative balancing tool !
Quote:
Aha, good point, didn't think of that. Many thanks for the info, I may have been messing with that tool all day and getting false readings and probably doing more harm than good. Cheers. |
Re: Alternative balancing tool !
Quote:
https://cx500.000webhostapp.com/SV650Carb_Balance.html HTH :) |
Re: Alternative balancing tool !
Thanks for the link, saw those in a magazine while back. Mine does seem a little lumpy at idle and I am experiencing some numb digits after about half hour of riding. Think I'm just going to have to invest in a balancing tool of some description. Probably the carbtune, looks like a doddle to use. Cheers again for info.
|
Re: Alternative balancing tool !
Personally I prefer a pair of Davida Gauges. Don't buy cheap ones. You can use a pair to balance any number of cylinders.
|
Re: Alternative balancing tool !
The big disadvantage of using a flow meter is that it measures just one carb/throttle body at a time and as it works by creating a slight restriction affects the tickover. So in swopping it between the measurements youve introduced a small variable that creates inaccuracy which on a car is insignificant but on a bike more important.
You can balance the carbs very accurately without expenditure by using a home made manometer. You just need a long length of plastic tube and some water.... |
Re: Alternative balancing tool !
Quote:
|
All times are GMT. The time now is 01:01 AM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.