Re: What have you tinkered with today?
 

cut an aperture in the Cam case so i can charge on the go, the USB cable end is slightly rubberised so it makes a nice tight seal.

http://i62.tinypic.com/a44z0n.jpg

Re: What have you tinkered with today?
 

Oh, she looks beautiful once again:) Washed and waxed, metal polished, chain and sprockets immaculate with a fresh dose of lube, all that nasty gunk removed from the rear wheel and chain guard. Levers adjusted. Pedals and linkages cleaned and lubed. Tomorrow: tyre check for condition and pressures, brake clean, black plastics restorer. Then meet my pal Allan (hope he brings his Suzuki GS 650 cafe racer) at the Ponderosa for a 4 hour loop of N.Wales' finest.

Glad I cleaned her today, two exhaust hanger bolts had worked loose on the Scotland trip. Lucky not to part company with them on the M6 coming home.

Re: What have you tinkered with today?
 

I got the 2007 SV650 SK6 in October 2013 and have put 8000 miles on her already. Oh boy am I glad I chose this bike! These SVs are rock solid and do just about everything really well. Commute, track days, back-road scratching, touring, is there anything the SV650 cannot do? What a bike, I'll be sorry to see her go.

Re: What have you tinkered with today?
 

Very cool :)

Re: What have you tinkered with today?
 

Nice work one the camera!

I have just doing a service, oil, filter sparks etc. It had a fair amount of corrosion around the rear spark (nut area). Sounds much happier with the new sparks in. Got the pegs painted black too! :D

Re: What have you tinkered with today?
 

Thats odd for the rear plug.
It'll look the part when your done

Re: What have you tinkered with today?
 

Ohhhhh so I decided after last week's ride, I wanted a better quality headlight bulb, than the current 'candle' which is on the VRaptor.

An hour later, following careful instructions left by a member of the Raptor Chapter, and the entire front end of plastics and assembly removed, it's almost time to get the bulb out :smt093

Mr Pegasus is so patient. I'm glad I won't be the one with a headache :lol:

Re: What have you tinkered with today?
 

I just sharpened the blades on my garden shredder. Not that exciting but very satisfying to see them all shiny and ready for action.

What have you tinkered with today?
 

Just replaced my mirrors with a set of 'extended arm' mirrors I got on the bay


Sent from my iPhone

Re: What have you tinkered with today?
 

Stripped and cleaned the rear caliper. I had to replace the dust seals as they practically came out with the pistons. One caliper was sticking which was why I got on to this. Feels great and as a result had to adjust the light switch so it came on earlier.