SV Frankenstein trackbike build. (Pic heavy)
Decided to retire my Aprilia Mille R from a track bike to a street bike. As a track replacement I purchased a '05 SV650s. Previous owner had the SV setup for super stock club racing and he out weighed me by a good 60lbs. I knew I would have some work to do in order to get bike properly setup for me as well as a number of other items needing addressed to "make it mine."
https://uploads.tapatalk-cdn.com/201...270a093b6d.jpg At first I was just going to clean it up, put it on a much needed diet, prep, change spring rates and valving and run it. One thing let to another and now I have a fullbuild on my hands. Half ZX6R half SV650, some Yamaha bits as well as Ape bits with every thing (outside of new Michelin Tires) being bought used off a couple different forums, eBay and of course local ads. Why a ZX6R and not a traditional GSXR swap you ask? Well I don't have a smart answer for you other than; 1) I like the design of the Kawasaki swingarm better, 2) their wheels are lighter and better looking imho and 3) I just wanted to do something different than the traditional swaps. https://uploads.tapatalk-cdn.com/201...981b2f5dbf.jpg Im open to constructive comments and even criticism if it comes with a reason. Here are some pics to keep the thread interesting: Swingarm needed to be notched to clear shock. https://uploads.tapatalk-cdn.com/201...76e3f8579b.jpg https://uploads.tapatalk-cdn.com/201...328e124a9f.jpg https://uploads.tapatalk-cdn.com/201...69bf35b6e6.jpg https://uploads.tapatalk-cdn.com/201...97c0b02781.jpg Battery and rectifier relocated and bike rewired as track bike. https://uploads.tapatalk-cdn.com/201...3aed038ce5.jpg https://uploads.tapatalk-cdn.com/201...d5de4fe8d1.jpg A handful of parts were taken to Full Throttle Powdercoating in Corona .CA. All bearings were replaced afterwards. https://uploads.tapatalk-cdn.com/201...1e4517db4b.jpg Front forks are freshly rebuilt with Ohlins 25 carts inside and a Scotts damper up top. Top/bottom yokes shaved. https://uploads.tapatalk-cdn.com/201...eeea29c8f3.jpg https://uploads.tapatalk-cdn.com/201...b6812f81b7.jpg How "SV Frankinstine" sits now, just need to build exhaust and tie up some loose ends. At the end of the day I made something different, put my twist on it, and I sure hope it works! https://uploads.tapatalk-cdn.com/201...28d70a113e.jpg Suggestions? Thoughts? FYI: I have a bin of leftover and mockup parts for sale from '05 SV, '03 GSXR, and 05-08 ZX6R. #3N1Motorsports #FrankensteinSV650 |
Re: SV Frankenstein trackbike build. (Pic heavy)
Looks blooming great so far
|
Re: SV Frankenstein trackbike build. (Pic heavy)
Quote:
|
Re: SV Frankenstein trackbike build. (Pic heavy)
Looks great, and very purposeful! I reckon it would look even meaner if the swingarm was satin black to match the frame, but that's just me :)
Does the bike have any major engine mods apart from the exhaust? That M4 system looks cool. |
Re: SV Frankenstein trackbike build. (Pic heavy)
Not sure about the ironing board but the rest looks awesome! :p
|
Re: SV Frankenstein trackbike build. (Pic heavy)
looks good and a job well done so far.
|
Re: SV Frankenstein trackbike build. (Pic heavy)
No motor mods, trying to keep it as reliable as possible but we'll see.
Swingarm was black but needed to be stripped to weld on. Also, I wanted a very raw looking bike and was originally going to have the frame stripped as well. If you look close at the fuel tank you'll see that it's clear powdercoat not gray. You are right, it would flow together better for the eye if the swingarm was black. https://uploads.tapatalk-cdn.com/201...2a72ce86ae.jpg Quote:
|
Re: SV Frankenstein trackbike build. (Pic heavy)
Quote:
Here's some undertail pics: https://uploads.tapatalk-cdn.com/201...8f373a6a98.jpg https://uploads.tapatalk-cdn.com/201...d6128db33c.jpg https://uploads.tapatalk-cdn.com/201...e8082cb257.jpg Here it is in stock form, I cut pounds of weight off this tail. https://uploads.tapatalk-cdn.com/201...333f41dc72.jpg https://uploads.tapatalk-cdn.com/201...7c14f12cf0.jpg |
Re: SV Frankenstein trackbike build. (Pic heavy)
I really like the clear powdercoat on the tank, it's a great (non) colour!
|
Re: SV Frankenstein trackbike build. (Pic heavy)
Quote:
Sent from my SM-G960U using Tapatalk |
All times are GMT. The time now is 04:56 PM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.