Curvy undertray broken.
 

On a rideout apparently my whole tailtidy / undertray completely fell apart and I lost everything, indies, plate, etc. I tried to bodge it back on but it's gonna end in tears lol.

I want to just get something on so I can stick a plate and indies on, I dont care if it's snow shovel, just something that works and will pass an MOT.

Having taken a look I cant work out which piece(s) I need or what I'd search for on ebay, if I search for undertray I see how many variations...

It looks like some of the original plastic has been chopped about a bit as well.

Attached some photos so you can see what I'm on about.

http://imageshack.us/a/img7/6420/9emz.th.jpg

http://imageshack.us/a/img13/8187/a7dr.th.jpg

http://imageshack.us/a/img801/9430/zx7u.th.jpg

Re: Help, my back end went all loose and stuff fell out...
 

Mate I have the snow shovel of my 04 if it fits you are more than welcome to come a get it im only in southend so not to far from you.

Re: Help, my back end went all loose and stuff fell out...
 

Just looks like the screw in the corner of the undertay has fallen out, unless the undertray has cracked and fallen off

Mine did the same, you can see the chimney nut on the left hand side, where the screw goes

Re: Help, my back end went all loose and stuff fell out...
 

Its a curvy, so won't fit without some butchery :D

Re: Help, my back end went all loose and stuff fell out...
 

Must have been winding it on Hong, your bike appears to have shat itself.

Re: Help, my back end went all loose and stuff fell out...
 

Dissapointed! I thought this was gonna be about skat/filth etc

Re: Help, my back end went all loose and stuff fell out...
 

No problem thought I would offer as im a nice fella like that :)

Re: Help, my back end went all loose and stuff fell out...
 

That's the 'hongman tries poppers ' thread

Re: Help, my back end went all loose and stuff fell out...
 

same thing happened to mine, lost punture repair, waterproof trouser, and nearly had a bungee rapped around the back wheel.

i ended up using cable ties to the lower grab rail. worked a treat

Re: Help, my back end went all loose and stuff fell out...
 

:puker: