handlebar swap
I am struggling with the riding position on my S, so i've got a yoke and bars from an N.
I have the longer clutch cable, but do i need the throttle cables, or is it just a case of re routing them ? Same goes for the switchgear wiring, is that just a re route for them ? |
Re: handlebar swap
I found using my Gilles Vario bars that I needed longer throttle & choke cables. My bars are higher than the S, but lower than the N.
Switch gear was ok |
Re: handlebar swap
Quote:
|
Re: handlebar swap
might help if you tell us what year the bike is as the first and second gen bikes are different as regards to S/N such as throttle switchgear.
|
Re: handlebar swap
Quote:
It is an injected K6.... |
Re: handlebar swap
N top yoke won't fit. Different offsets. You also need the lower triple.
|
Re: handlebar swap
Quote:
|
Re: handlebar swap
well, it's been a long time coming, but i've done it !
standard 'N' top yoke, drilled to accept fat bar risers, tech 7 fat bars, N clutch cable and venhill extended throttle cables |
Re: handlebar swap
Quote:
Good stuff. Did you need to change out front brake lines for longer too? |
Re: handlebar swap
Why have you drilled an N top yoke that already has risers...to fit risers? Am I missing something? Do you mean you drilled an S top yoke?
|
All times are GMT. The time now is 06:14 PM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.