SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Right indicators not working - Wiring advice? (http://forums.sv650.org/showthread.php?t=231200)

Adam Ef 01-11-18 10:19 PM

Right indicators not working - Wiring advice?
 
Riding today and just about home when I noticed my indicators weren't working to turn right. Both front and rear. Left hand is all ok. Right hand work too when used as hazards so bulbs are fine and power is reaching them. I've looked under the tank and in trying to pull wires and connectors to somewhere I can see them have got the right hand ones working on their own intermittently. So it's either a dodgy wire, loose connection or a connector block that needs cleaning.


Just after a quick bit of advice if anyone knows which of the connector blocks I need to pull... photo below. Before I try and pull them all into a position I can work on. They're quite tightly tucked in there.


https://farm2.staticflickr.com/1909/...e807a3dc_z.jpg

SV650rules 02-11-18 09:08 AM

Re: Right indicators not working - Wiring advice?
 
Yeah sounds like handlebar switch contact corroded.

Bibio 02-11-18 10:51 AM

Re: Right indicators not working - Wiring advice?
 
i'll go for a corroded indicator connector in the inside of the headlight cowling. failing that then the white block connector also in the headlight cowling. its a common problem with the white connector.

Adam Ef 02-11-18 12:19 PM

Re: Right indicators not working - Wiring advice?
 
Cheers all. The indicators work when these connectors are nudged, but no change when the wiring around the switch is moved. That and the fact it's both front and rear right hand indicators leads me to suspect something around these connector blocks.

Toooldtodie 21-11-18 07:51 PM

Re: Right indicators not working - Wiring advice?
 
Quote:

Originally Posted by Bibio (Post 3094384)
i'll go for a corroded indicator connector in the inside of the headlight cowling. failing that then the white block connector also in the headlight cowling. its a common problem with the white connector.


Same. Bypassed with new connectors and wires, left one's been fine. Bit like the headlamps and their connector block.

Adam Ef 21-11-18 09:52 PM

Re: Right indicators not working - Wiring advice?
 
I'm not 100% convinced mine is fixed, but I did undo the block in the above photo and sprayed it with contact cleaner. It's been fine since. Really need to strip it all down and inspect it properly though.


All times are GMT. The time now is 12:53 AM.

Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.