SV650.org - SV650 & Gladius 650 Forum

Page 3 of 3

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - Gear/nautral issues (http://forums.sv650.org/showthread.php?t=229235)

johnnyrod

12-01-18 09:45 AM

Re: Gear/nautral issues

Possibly. The problem I've found is that the plastic worm gets gouged by the ball bearings.

garynortheast

12-01-18 11:48 AM

Re: Gear/nautral issues

Worth just putting new one in. I bought one from Robinsons about 3 years ago for around £47, and the difference in the clutch operation made it worth every penny.

timwilky

12-01-18 12:27 PM

Re: Gear/nautral issues

I would also second the advice from Andy65 regarding the lever

It tends to corrode causing it to then bind to the shaft.

When removing, take care to compress the fibre bush to remove. They are not replaceable. a good scrub with emery cloth inside the bore, replace the bush and some light oil.

All times are GMT. The time now is 03:57 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page