K6 Oil Cooler and Oil Pipe
 

I've just swapped the oil lines on my K6 for an aftermarket kit, only the long line had failed, I took the opportunity to fit another oil cooler I'd previously cleaned up at the same time. These bits are left over and and free to a good home should anyone need them:

Oil cooler: needs a clean up but worked fine on the bike before the swap. The small bracket at the bottom that the protective mesh screws on has fallen off.

Short oil line: this also worked fine, according to the bike's service records this is a newer part.

https://i.imgur.com/rBA7sEqh.jpg

These are free if anyone wants to collect them (NN18 ).

£0.00

Alan