SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - 2000 SV650 S slip on (http://forums.sv650.org/showthread.php?t=237676)

2000 SV650 S slip on

Hi, this has probably been asked a thousand times before but my search turned up too many results to look through.

On a curvy S, where do I cut the exhaust to fit a slip on?

Thanks.

Re: 2000 SV650 S slip on

Quote:

Originally Posted by rob8781 (Post 3121443)

Hi, this has probably been asked a thousand times before but my search turned up too many results to look through.

On a curvy S, where do I cut the exhaust to fit a slip on?

Thanks.

When I fitted my oval Delkevic, I had to buy a link pipe and then first fit that to the end can and then decide where to cut the oem pipe in order to get the best position and fit and angle in order to clear the swing arm etc . Then with a bit of fiddling with the can n link pipe and hangar you should be able to find the ideal position, then it's just a case of using some exhaust assembly silicone and tighten it all up.
It's a bit of a 'suck it 'n' see' kinda thing.