New member - Cafe Racer (ish) project.
Hi guys,
After 10 years away form road bikes I decided to embark on a Café Racer (ish) project. …Oh no!!! Not another one I here you cry….yes…sorry. In my defence I was toying with the idea many years ago, before it became all the rage. In short I bought the bike in 2015 as a full-faired version (top and bottom) in mint condition with about 12K on the clock. Then over the next 2 winters transformed it. I did it in 2 phases: 1st phase – rear end tidy up and suspension…followed by a track day or two:). 2nd phase (2016 winter) the final rear end overhaul and front end change. Anyway: I just wanted to thank all of you for all your help! There are too many people to mention and to be honest I have not kept a great record of where I got what idea/advice….sorry! I do however, have quite a good record of what I changed, where I got to parts and some of the templates I made + loads of photos through the build if anyone’s interested? Thanks again everyone…. http://forums.sv650.org/picture.php?...pictureid=8252http://forums.sv650.org/picture.php?...pictureid=8243http://forums.sv650.org/picture.php?...pictureid=8250 http://forums.sv650.org/picture.php?...pictureid=8251http://forums.sv650.org/picture.php?...pictureid=8248http://forums.sv650.org/picture.php?...pictureid=8244http://forums.sv650.org/picture.php?...pictureid=8242 |
Re: New member - Cafe Racer (ish) project.
Nice curvy
|
Re: New member - Cafe Racer (ish) project.
Nice, simple, and clean. No nonsense :)
Sent from my SM-G935F using Tapatalk |
Re: New member - Cafe Racer (ish) project.
Thanks guys...I really wasn't expecting feedback that fast!
|
Re: New member - Cafe Racer (ish) project.
Nice. I have to ask, where have you hidden the miles of spare wire around the headlight? I have taken the fairing off my curvy and I have wire everywhere.
|
Re: New member - Cafe Racer (ish) project.
Ah yes, good question, the dreaded wiring loom.
The simple answer is it's all carefully wrapped round and below the airbox in a kidney shape. Each side is doubled back and is secured to avoid the carb throttle linkages. The other trick was a Ebay bought front end wiring harness (no original parts were harmed in this build - most bits and pieces were from Ebay) which I modified to remove redundant cabling and then added to, creating a better fit. Finally after a quick trip to a local auto factors the main large black clock plug was removed and new (required) cables soldered on to lengthen the loom (using the same colours to avoid a mix up when connecting the clock/dash display). If you want me to post anything specific about the build just ask, I'll upload any pics if I have or take new ones if needed. |
Re: New member - Cafe Racer (ish) project.
Yep, worthwhile mods, not too OTT as to try to make the bike something it isn't and looks coool!
|
Re: New member - Cafe Racer (ish) project.
That looks very tidy, nicely executed.
I'm drawn to the radiator; is that standard and stripped of paint, or something else? |
Re: New member - Cafe Racer (ish) project.
It's not the standard one, it's another ebay special (£45 delivered). The reason i didn't keep the standard one is that on the faired SV (MKI anyway) the fairing grommet mounts are welded to the sides and I wanted clean lines. I didn't want to hack them off as I'm keeping all the original parts...so a new one was needed. It very nearly fitted as well!!! but unfortunately the bottom mount was off so I made and adaptor plate. You really can tell unless you go looking. The cover frame was a made at work, the honeycomb mesh was supplied again...you've guessed it..by ebay! Oh and I moved the horn...looks better out of the way and can only help with cooling...not that it's ever been a problem.
|
Re: New member - Cafe Racer (ish) project.
Very tidy-looking machine! What exhaust is it? Neat job getting the angle of the can to match the tail.
|
All times are GMT. The time now is 01:58 PM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.