clutch cover outer O'ring part no. 11484-19F01
I have a clutch cover outer O'ring, Suzuki part number 11484-19F01. I ordered this for my 1999 SVSX bike, but it does not fit, probably as my bike is a very early import model.
The part is new and has not been used, though I opened the bag only to find that it was too big. It cost me about £10, but give me £5 and I will include the postage. Duke |
Re: clutch cover outer O'ring part no. 11484-19F01
If it'll fit mine I'll have it. It's a 1999 naked SV650 standard UK model.
Cheers. |
Re: clutch cover outer O'ring part no. 11484-19F01
Paul,
I can't guarantee that it will fit your bike. I suggest that you contact a dealer and give them your frame number to confirm. My fame number did not have as many digits as expected and the guy guessed from the fiche. Duke |
Re: clutch cover outer O'ring part no. 11484-19F01
OK mate cheers will look into it.
|
Re: clutch cover outer O'ring part no. 11484-19F01
I had the same problem when I replaced the O ring. You could cut a bit out and lay the seal in with the cut at the top of the cover. Use some Blue Hylomar gasket seal. Jobs a goodun.
|
Re: clutch cover outer O'ring part no. 11484-19F01
That is what the previous owner had done and it was leaking. Just wanted to sort it without much faff. I have now gone down the route of cutting my own gasket and more gasket gue. Not ideal - would like the proper seal. But I have other issues to sort for now.
Duke |
Re: clutch cover outer O'ring part no. 11484-19F01
Any takers on this?
|
All times are GMT. The time now is 10:23 PM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.