Replacing chain and sprockets
My bike has done just over 17k miles. I bought it at about 16k. The chain and sprockets are still the originals, and they seem okay. But I'm thinking of getting them replaced, as they will be nearing the end of their life.
A couple of Q's: what's a good set to get for cheapish? And how much can I expect to pay to get them fitted? (I don't have the riveting tools). |
Re: Replacing chain and sprockets
Quote:
Quote:
Quote:
There's an article in this month's Bike mag about fitting them yourself, but having done so myself* it's not something I'd wish on others and I'd certainly be prepared to pay for fitting next time around. * But had excellent help and assistance from Rictus - and mullered Sid Squid's rivetting kit in the process :oops: . |
seen this on Ebay
Hope this might help... if you remove the swinging arm , then there's no need for a chain riveter. p.s ebay seller is nothing to do with me |
i got an origianl chain and sprokets second hand unused for £60
you can do most of the fitting yourself and just take the bike to the shop to have the rivet closer for less than a fiver, if you enjoy spannering then go for it, if you dont it money well spent to have it fitted take of the front sproket cover, my back sprokets was worn after 15K but the front was finished, it was also making a horible cluncking noise everytime i pulled away which has now gone |
OEM Suzuki is cheapest on a per mile basis, others may have an initial lower cost but will not last as long, aftermarket sprockes will also be noisier
|
:shock: He speaketh the truth! :lol:
. |
Yup, with most aftermarket sets the life is limited by the rear sprocket rather than the chain- especially if you go with an alloy one.
On the subject of which, all alloy sprockets that aren't Renthals seem to be rubbish, by all accounts. The Renthal one I have fitted looks to last about 2/3 as long as an OEM one, though to be fair it's getting a much harder time than the original one did. But it looks so nice :) Also, aluminium sprockets are extremely vulnerable to worn or stuff chains, they tear up in no time if you don't look after the chain. There's a theme emerging here... Personally, I do most of the change myself- I replace the chain and sprockets and fit the new chain with a clip link, then ride to my dealers to have them fit the rive link. Costs me a fiver. |
On another note, it's interesting that to find a chain supplied with a split link is becoming harder and harder - most just have the rivet link.
. |
Another side note:
Has anyone tried these. http://www.supersprox.com/ Aluminium carrier but with steel teeth. Great looks, lighter weight (than standard), longer life???? Not tried them but I am tempted. |
Quote:
i'm not sure if its a good idea but i fitted the rivet link on using a pair of molegrips and then slowly rode to the dealer, it was a right battle to get the final plate on and it seemed pretty solid |
All times are GMT. The time now is 08:43 AM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.