Where to fit a scott oiler?
 

Hi
I've got a naked 2007 SV650. My BF wants to fit a scott oiler to it. Where would be the best place? It can't be fixed to the snow shovel at the back because the bike is getting a tail tidy soon.

Any suggestions?

Thanks
Linda

Re: Where to fit a scott oiler?
 

under the seat, it will fit ziptied to the bits of metal in there, then thread the tube down and behind the swing arm, that is how mine is fitted .

Re: Where to fit a scott oiler?
 

the chain;)

Re: Where to fit a scott oiler?
 

Do you really attach it to the chain?!?!:confused::)

Re: Where to fit a scott oiler?
 

Under the rear plastics, so you fill it by removing the rear pillion seat.

Rough fitting guide for K3+
http://www.scottoiler.com/pdf/Suzuki...h13-6-2007.pdf

Re: Where to fit a scott oiler?
 

Same as above for my K3, zip-tied to frame left-side underneath pillion seat, adjuster knob facing up the slope towards the tail unit, reservoir at the lower end. Think my line then pops out of the undertray near the front sprocket and is zip-tied along the bottom of the swingarm.

Just shout if you need any photos and I'll snap a couple at work tomorrow to put up in the evening.