SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - pegs (http://forums.sv650.org/showthread.php?t=104054)

ljharmitt

05-02-08 03:56 PM

pegs

My left hand side foot peg has become loose including gear lever, how do i tighten it? Also what tools do i need?

dirtydog

05-02-08 03:58 PM

Re: pegs

You'll probably need to take the whole assembly off incuding the hanger should be just 2 allen bolts on then tighten up the footpeg with another allen key

yorkie_chris

05-02-08 04:01 PM

Re: pegs

IIRC it's a 6mm one to take the hangar off, and an 8mm one behind it to tighten the peg.

Expect the 6's to be a bit of a pig though.

plowsie

05-02-08 04:08 PM

Re: pegs

The 8 needs to be done up tight so that you find it difficult to get back off ;)

Theyre sockets heads on the CBR :D lol.

petevtwin650

05-02-08 10:57 PM

Re: pegs

You'll need to undo the gear linkage too. One of the nuts is an opposite thread, so watch out. Good time to re lube the gear lever where it sits on the shaft.

All times are GMT. The time now is 09:28 AM.