![]() |
Neio79 Down!!!
Its happened to me today, down i went!!
about 500m from my house turning out on to the road , back end went on what must have been greasy road. Luckly all of about 3/4 MPH the dammage to the bike is, bar end scuffed, brake leaver very slightly scuffed! rear brake leaver bent ( bent back in place now) and ground down a bit, and the right fairing scuffed and a little crack in it. I had rear cras bobbins on the swing arm so that took the brunt and meant there was no damage to the rear end at all. If only i had got around to fitting the frame sliders!!!!!!!!! doh. anyhow i am fine and the bike rides fine all working just anoying cosmetic dammage on a two month old bike!! I am not going to involve insurance company unless i really have to so does anyone know of a good company i can use to get my faring repaired??? |
Re: Neio79 Down!!!
Sorry to hear about an off on another Kwak! Glad to hear the damage isn't too much.
|
Re: Neio79 Down!!!
awwww mate bad start to the day .. glad to hear that you are okay i know that's its annoying that you had a sparkly new bike and it's now scratched but it's cosmetic nothing more and your ok..... but even so take a few of these :grouphug: :grouphug:
|
Re: Neio79 Down!!!
ahhh gutted, as soon as i read it I though hopefully not on the new bike.
At least its not to bad. |
Re: Neio79 Down!!!
bugger bugger
|
Re: Neio79 Down!!!
:smt056Poor you. Glad you are ok though and the bike is fixable.
|
Re: Neio79 Down!!!
Sorry to hear that Neio.
Just remember, it could have been a lot worse. |
Re: Neio79 Down!!!
$h1t
glad your ok.......... and the bikes pretty ok to |
Re: Neio79 Down!!!
Unlucky.
You know the old addages though about accidents and distance from home. Also there's one about frame sliders and fridges/sheds I believe. As for your plastics, have you thought of welding them yourself? |
Re: Neio79 Down!!!
Sorry to hear :( but at least you're ok and the bike is fixable ;-)
|
All times are GMT. The time now is 02:17 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.