Are TL 1000 Yokes compatible for Front end swap?
 

Basically as the title suggests, i'm having real trouble sourcing some SRAD 750 yokes for my K4 750 forks and was just wondering if anyone knows whether TL 1000 yokes will fit, if so which model/years?

Any help much appreciated!!!

Si

Re: Are TL 1000 Yokes compatible for Front end swap?
 

All of them AFAIK

Compatible with the TLS/TLR forks and SRAD axle, obviously will only work with the USD's.

TL mudguard also fits gixxer bits, as do the calipers on the SRAD.

Re: Are TL 1000 Yokes compatible for Front end swap?
 

TL triples will not work with 750 forks.

Re: Are TL 1000 Yokes compatible for Front end swap?
 

I stand corrected, can't remember where I heard that though.

What's different?

Re: Are TL 1000 Yokes compatible for Front end swap?
 

lower triple bore is 55mm on tl's and 54 on gsxr's.

Re: Are TL 1000 Yokes compatible for Front end swap?
 

I found that one out, annoying.

For the others, the top yoke is the same though i think, the TL forks are also longer.

Re: Are TL 1000 Yokes compatible for Front end swap?
 

K guys thanks for the help!

Re: Are TL 1000 Yokes compatible for Front end swap?
 

Could be useful to know, depending on how you want the geometry to end up.

Could you get the extra mm machined out? i.e is spacing and offset the same?

Re: Are TL 1000 Yokes compatible for Front end swap?
 

err no, the offset is fine i think, just the bottom yoke has larger holes, if you want TL forks use TL yokes, the same said for srad stuff.