removing tank pad and glue
 

Need to remove an old tank pad, a self adhesive oxford spine type. Thinking best to warm it up with a hairdryer and peel off slowly, but what about removing any residue of the glue and making sure the surface is clean before applying the new one ive bought. presumably a solvent, but what is safe to use on the paint/laquer?

appreciate your advice
steve

Re: removing tank pad and glue
 

heat to get pad of then washing up liguid on residue and rub in with soft clothe, leave for a while then scrape of with fingernail or something not too sharp and then tcut any marks and buuf it all up

Re: removing tank pad and glue
 

aye you would be best 2 heat it up a bit other wise it will maby do a bit of damage 2 the paint work.;)

Re: removing tank pad and glue
 

thanks for that... would seem ironic to damage paintwork, removing something thats designed to protect it!! lol

Re: removing tank pad and glue
 

whitye spirits might help (depending what type of glue has been used)
it will not damage the paint, but might help to soften the adhesive

Re: removing tank pad and glue
 

warm it up first as said, then you can use petrol to get the sticky stuff off which will also clean the area up nice for the new one to go on.

I used a little bit of petrol on a rag to remove the sticky stuff after I took off all the warning stickers. I also cleaned with water and applied a bit of polish afterwards as well.

Re: removing tank pad and glue
 

petrol works very well takeing the remains of something like that off!;)

Re: removing tank pad and glue
 

Yup petrol will do it, make sure to smoke at the time ... keeps you sharp :-P

Re: removing tank pad and glue
 

Wd40

Re: removing tank pad and glue
 

Muc off motorcycle cleaner