![]() |
Nifty little gizmo
Found this on an american fourm....lets you see the REAL speed. pretty good for all you pointy lovers, as it cant be used on the curvy! handy as well if you plan on going abroad as it converts mph to kph realtime!
http://www.solomotoparts.com/product...roductid=30538 apparently it works really well, well worth the money i think! |
Re: Nifty little gizmo
Why can't it be used on curvy?
And can't you change the pointy over to kmh anyway? |
Re: Nifty little gizmo
well i dont have a curvy, so didnt know! well i pressume its for digital clocks, as you can convert to kph, as with the curvy you have to get the stick on dial thingys.
would be nice to see the exact speed your doing though! |
Re: Nifty little gizmo
Curvy is a digital clock too ;-) Just it outputs as a dial... (with kph writtin in the middle too....)
|
Re: Nifty little gizmo
Quote:
|
Re: Nifty little gizmo
1) You can get these in the UK, been available for many years now.
2) The Pointys can switch between MPH and KMH anyway. 3) You can get them to work on Curvy's as the speedo is electronic just like the Pointy. 4) It makes an educated guess to what your correct speed is, funnily enough that is basically what the OEM does. |
Re: Nifty little gizmo
Quote:
What do you get in the kit? would these be sufficient for a gixxer front end conversion i.e. starting with no speedo? I suspect not. |
Re: Nifty little gizmo
Quote:
Quote:
|
Re: Nifty little gizmo
Fast Bikes have fitted one to their long term FZ1. This what they had to say.
" So, what about this month? The down-gearing changes I made in the last issue are continuing to impress, but changing the sprocket sizes does result in an inaccurate speedo reading. Thankfully, down-gearing means that your speedo over reads, so as long as you’re showing the speed limit on the clocks as you pass Gatsos, you know you’re well under the limit – up-gearing leaves your bumhole a bit flappier unless you do the maths first. The best thing to do is remove all the doubt and confusion, and fit a Speedo Healer from Bikersdiscountstore.co.uk. The neat little unit is an absolute doddle to fit, taking less than 20 minutes to mount neatly under your seat unit, and two minutes to program it. The changes I’ve made in gearing (one tooth off the front) require a compensation of 5.9%, but the excellent online calculator also factors in the manufacturer’s leeway, and so 10.9% would mean a near as dammit spot on reading from your clocks. I’ve erred mildly on the side of caution and licence preservation, and dialled in 8%. The best thing of course is that you can change your gearing as many times as you like, by whatever margin you like, and just keep reprogramming the unit, which takes moments. This new V4 healer is a massive improvement over the old unit - much easier to set up, and smaller." Not very interesting, but hey :) |
Re: Nifty little gizmo
Quote:
Quote:
|
All times are GMT. The time now is 12:35 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.