SV650.org - SV650 & Gladius 650 Forum - Advice please! brake lines.

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- Hardware (http://forums.sv650.org/forumdisplay.php?f=136)

- - Advice please! brake lines. (http://forums.sv650.org/showthread.php?t=119431)

BBadger

14-10-08 06:25 PM

Advice please! brake lines.

Im looking for a new set of brake lines.
braided ones. Full front or full front and back set.

Can any one tell me who make the best lines, and best prices about.
and what i need for a full front set, like bango bolts or do i just chuck the join on the front for the standard lines ?? :shock:

thanks in advance
brock.

Jester666

14-10-08 07:22 PM

Re: Advice please! brake lines.

Hel or Goodridge are good.

If you buy the set the banjo bolts should be included as well as all of the new copper washers.

Dangerous Dave

17-10-08 11:30 AM

Re: Advice please! brake lines.

HEL, go for stainless banjos too.

SV-net

24-10-08 10:33 PM

Re: Advice please! brake lines.

This may be of interest http://forums.sv650.org/showthread.php?t=114400

dyzio

25-10-08 09:47 AM

Re: Advice please! brake lines.

Double check everything before you start fitting them: length, banjo angles, bolts (including thread pitch).

Sean_C

25-10-08 10:20 AM

Re: Advice please! brake lines.

Sorry for hi jacking. Can somebody tell me if the banjo bolts for a curvy are m10 x 1mm pitch or 1.25mm pitch? Mine are horrible so some stainless are needed.

dyzio

25-10-08 11:36 AM

Re: Advice please! brake lines.

Quote:

Originally Posted by Dangerous Dave (Post 1653301)

1.00 pitch on the front Master Cylinder.

1.25 pitch on the front Callipers.

HTH

Sean_C

25-10-08 12:00 PM

Re: Advice please! brake lines.

Quote:

Originally Posted by dyziowg (Post 1666086)

HTH

Thanks, I'll write that down.

All times are GMT. The time now is 04:10 PM.