Another couple of Laser extreme/dual exhaust questions
 

Hello all great site i am hoping sumone could help me with a few facts about these 2-2 systems!?

i have a K3 sv650s, i was looking at these systems in various places for around £500 for the k3- and managed to come across a fleabay bargain for £250 brand new!!! so naturally i jumped at such a bargain :p

upon arrival i ripped it open to find all is sexy as could be till i looked in the 'technical info' booklet.....here it sez for sv650 04- (k4 i assume)

now i know the k3 has slightly higher rear subframe, but no-one can tell me if it will actually fit my k3 (wiv a few mods mebe?)even tho the part number is same for k3- on laser site as the K4 (in fact there is only one part number....)

i am hoping it'll fit, but wanna be sure b4 i rip all me plastics of to fit the tail-tidy/bracket!

also, laser states that these exhausts "have been developed on a standard motorcycle with standard adjustment. therefore it is normally not required to modify the fuel setup of your machine."

so i dont need a remap or power commander???

hope sumone can put this noob outa his misery! lol

thx in advance
Ampz

Re: Another coupla laser extreme/dual exhaust questions
 

hey dude i was thinking about a set of these until the org talked some sense into me anyway you may need to bodge a few bits on but i cant see there being a massive difference between the k3 and k4 mind you i could be completely wrong has it got a manual with it.

Re: Another coupla laser extreme/dual exhaust questions
 

i wouldnt av paid the full price for em but was lookin at spending £250 on a blue flame evo an snapped up the bargain

yup it has a manual, sez 04- in the parts list but model numbers is same as 03- on their site...i emailed laser an turned out they have a snails pace ffs

i am itching to whack em on lol

Re: Another coupla laser extreme/dual exhaust questions
 

be carefull though if you chop your system and theyre not right your stuffed.

Re: Another coupla laser extreme/dual exhaust questions
 

LOL stock system is already chopped from my previous blue flame, had a bit of a lowside so damaged the can and needed a replacement ;)

i have a re-connection sleeve to put original can back on if necessary.....but fook that could never go back to stock! :D

Re: Another coupla laser extreme/dual exhaust questions
 

ahh but doesnt the laser need to be cut further up the pipes.

Re: Another coupla laser extreme/dual exhaust questions
 

nope the laser extreme 2-2 is a full system, jus use the original headers....


http://img230.imageshack.us/img230/3...8447lf6.th.jpghttp://img230.imageshack.us/images/thpix.gif


will post pics as i go if anyones interested

Re: Another coupla laser extreme/dual exhaust questions
 

oh well then theres no excuse you can always take it off it doesnt work.

Re: Another coupla laser extreme/dual exhaust questions
 

yeah post some pics and stuff of it fitted i'll be interested to see it all on and sorted.

Re: Another coupla laser extreme/dual exhaust questions
 

ok jus stripped the rear end to remove the evotech tail-tidy so i can fit the laser tidy-bracket fingy, jus gotta remove the battery so i can slide down the undertray to unscrew sed evotech tidy

http://img393.imageshack.us/img393/4...8439cm2.th.jpghttp://img393.imageshack.us/images/thpix.gif

http://img300.imageshack.us/img300/4...8440td5.th.jpghttp://img300.imageshack.us/images/thpix.gif

ive also got sum R&G crash protectors and sum thunder grey lower fairings (goin for the 2-tone look) to go on but there aint enuff days in the week (besides i dont av a torque wrench fingy)

will update as i go wiv the pics

heres my blue flame before the off! :sad:

http://img258.imageshack.us/img258/6...nonodm5.th.jpghttp://img258.imageshack.us/images/thpix.gif