SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   white creamy gunk (http://forums.sv650.org/showthread.php?t=123057)

larigos 26-12-08 02:32 PM

white creamy gunk
 
I have just replaced the spark plugs and was checking the airbox/filters the main airfilter is a little dirty nothing a little clean wont help. However I took out the metal gause filter on the left hand side and it had a creamy white gunk on the bottom of it - am I to be worried by this? first thing that came to mind was oil/water mix? not sure what would cause this. I have a little white smoke out the rear but only when reving the engine. The oil level is on /just below the full line when on the padock stand. Any ideas??


its a k3 pointy n with 8K on the clock oil change about 500 miles ago, ridden in all weathers rain etc.

Mark

Dave20046 26-12-08 02:47 PM

Re: white creamy gunk
 
Could it be white grease?

glade 26-12-08 03:13 PM

Re: white creamy gunk
 
do you do lots of short journeys?

I get white cream/ condensation in my oil sight glass at this time of year because I commute daily 10 miles.

A good long ride and thrashing generally clears it.

yorkie_chris 26-12-08 03:36 PM

Re: white creamy gunk
 
I wouldn't be too worried, condensation and oil vapour get mixed a lot around that area.

larigos 26-12-08 04:12 PM

Re: white creamy gunk
 
cheers, I now have a slight problem - the bolt that hold the rad to the engine has sheered off - I think age etc has softened it etc how do I get it out? I do have a replacement.

Dave20046 26-12-08 04:19 PM

Re: white creamy gunk
 
Quote:

Originally Posted by larigos (Post 1728005)
cheers, I now have a slight problem - the bolt that hold the rad to the engine has sheered off - I think age etc has softened it etc how do I get it out? I do have a replacement.

Can you get to any of it? Mole grips?
If not it might be a case of drill out and tapping.

Dangerous Dave 27-12-08 01:04 PM

Re: white creamy gunk
 
Quote:

Originally Posted by larigos (Post 1728005)
cheers, I now have a slight problem - the bolt that hold the rad to the engine has sheered off - I think age etc has softened it etc how do I get it out? I do have a replacement.

New thread started; http://forums.sv650.org/showthread.php?t=123063


All times are GMT. The time now is 05:04 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.