Stainless steel rod
 

Anyone know where I can get some 5mm stainless steel rod?
I only need about 400mm

Re: Stainless steel rod
 

Not in person, but maybe online - try Ebay. I was looking for a certain length of (hollow) metal rod, a bit like scaffolding (in fact I think it was a length of scaffolding in the end) and I found a guy on Ebay. He made loads of different types, solid and hollow. Try searching for 'steel bar' or 'metal rod' or any combination of those and you might find him. Sorry I'm lazy else I'd go find him for you ;)

Re: Stainless steel rod
 

I did a search on ebay for stainless steel rod and got lots of results most of which were for welding rods

Re: Stainless steel rod
 

B&Q? They sell steel, brass, alloy, maybe stainless too.

Re: Stainless steel rod
 

After a particular alloy? Any decent steel supplier should have SS rod. Yellow Pages for a supplier near you.

Cheers

Re: Stainless steel rod
 

go to your local industrial suppliers or just pull the phone book out.

5mm stainless bar is pretty common so i'd imagine most would stock it/have in next day but minimum order will be 3m.

Re: Stainless steel rod
 

scrap metal place?? weigh in place.??

Re: Stainless steel rod
 

Re: Stainless steel rod
 

Up the A3 toward Kingston,PASS the Hook interchange next turningA240 double back down the slip road,off the rounabout that runs parallel with the A3 back towards Hook int,before end turn right Fullers Way then first left WILLCOCKS CLOSE. I can't remember the name but as you look into the close it is the second to last on the lefthand side. They do all sorts of stainless marine grade SCREWS, ROD, BAR ETC.

Re: Stainless steel rod
 

3m??? I only need 400mm of it to make a couple of clutch pushrods