SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   High Level Link Pipe (http://forums.sv650.org/showthread.php?t=126611)

Sally 27-02-09 07:29 PM

High Level Link Pipe
 
Anyone know where i can find one?
Looked at ebay, searched this forum, searched suzuki's own site..
Anyone any ideas?
Also, does it matter which type of exhaust i have?
Its a low level link pipe atm, just wanting a high level link pipe, even a medium level would do..

Check my exhaust out, there is a link to pics in my sig.
Thanks, David.

yorkie_chris 27-02-09 07:32 PM

Re: High Level Link Pipe
 
They're a pain in the rse.

Normal panniers don't work, if you fit rearsets then the link pipe is in the way. Only good thing is when you crash the pillion peg takes the slide not the can.

Otherwise, try the makers of your exhaust or beowulf exhausts.

silent11 27-02-09 07:33 PM

Re: High Level Link Pipe
 
am afraid you cant buy them

only of manufacturers or custom made

blue flame do high level pipes but i doubt they will not juts sell you the link as its blueflame lol

best option is to get one made up so you can get it to what you want

thefallenangel 27-02-09 07:35 PM

Re: High Level Link Pipe
 
i got a micron one which you can have along with the adaptors. I bought a set of ebay for the Stainless steel pipes but it's done my head in. I'm going back to normal level tomorrow providing my original link still fits.

I'll give you a PM tomorrow if i swap it back. I got the adaptors etc . . do you need the new strap too or do you have one?

Sally 27-02-09 07:47 PM

Re: High Level Link Pipe
 
Ok, foning blue flame right now.

I wont be changing rearsets, i dont use panniers, i dont take pillions as such.
Just think it looks alot better..

Still looking around..

thefallenangel 27-02-09 07:54 PM

Re: High Level Link Pipe
 
info for you if you wanted mine.

It's Micron and the OD of the bottom pipe is 52.5mm and the bit going onto the can i think is 52.5mm as well (not 100%). I got all the bits so if you want it let me know as of tomorrow i'm going back to standard.

Dave20046 27-02-09 08:10 PM

Re: High Level Link Pipe
 
Quote:

Originally Posted by yorkie_chris (Post 1801816)
. Only good thing is when you crash the pillion peg takes the slide not the can.

Don't I know it my cans been in atleast two bad crashes and it's fine. High level ftw

dizzyblonde 27-02-09 08:23 PM

Re: High Level Link Pipe
 
http://cgi.ebay.co.uk/SUZUKI-SV-650-...1%7C240%3A1318

perhaps email the seller and find out the diameter?

silent11 27-02-09 08:26 PM

Re: High Level Link Pipe
 
Quote:

Originally Posted by dizzyblonde (Post 1801868)
http://cgi.ebay.co.uk/SUZUKI-SV-650-...1%7C240%3A1318

perhaps email the seller and find out the diameter?

for curvy

dizzyblonde 27-02-09 08:27 PM

Re: High Level Link Pipe
 
I know!!

whats the difference??


All times are GMT. The time now is 05:52 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.