Need bits lots of bits sv650 2002 curvy K2
 

(sorrie about the title it is spsoe to say Need bits lots of bits sv650 2002 curvy K2 not Need bits lots of bits sv650 2002 curvy K1)
any one have of the bits i need ??


hey

here is a list of bits i need to fix my baby. if you have them please PM or leave a post

My bike is a sv650 2002 curvy K2

The Bits list:

Front Master Cylinder
Switch Assy, RH
Balancer Set, Handle Bar (standed bar ends)
Clutch Lever + Rubber Clutch Cover
Front Brake Lever

Speedometer Cover ... Number's 9, 16, 18 (click link for info belowe)
http://www.alpha-sports.com/suzuki_parts.htm?gclid=CP-5w9rFgpkCFccJ3wodwBDznQ

Head Lamp Unit ... Number 3 (click link for info belowe)
Head Lamp Rim ... Number 2 (click link for info belowe)
http://www.alpha-sports.com/suzuki_p...FccJ3wodwBDznQ


Bracket, Front Footrest LH ... Number 2 (click link for info belowe)
Bar, Front FootRest LH + fitings ... Number 8 (click link for info belowe)
Bar, Front FootRest RH + fitings ... Number 7 (click link for info belowe)
http://www.alpha-sports.com/suzuki_p...FccJ3wodwBDznQ


Gear Shifter
Rear Brake Lever

red means i have it :P

i think thats ever thing

regards

Re: Need bits lots of bits sv650 2002 curvy K1
 

some one must have some bits

Re: Need bits lots of bits sv650 2002 curvy K1
 

I have a new clutch lever and rubber cover for it!;)

Make me an offer.

Re: Need bits lots of bits sv650 2002 curvy K1
 

i have the switch assembly but if its just the casing your after it dosnt have the little peg to keep it from rotating. Apart from that all the switches are fine.

Re: Need bits lots of bits sv650 2002 curvy K1
 

and i have a front master cylinder - its off a '00 S so should do you - PM me if wanted :D

Re: Need bits lots of bits sv650 2002 curvy K1
 

gear shifter ebay a tenner


I have some decent bars and by balancer set do you mean bar ends?

Re: Need bits lots of bits sv650 2002 curvy K1
 

cant use ebay :(
and yer i mean bar ends

Re: Need bits lots of bits sv650 2002 curvy K1
 

do you mean the little peg that goes into the handle bars ?

Re: Need bits lots of bits sv650 2002 curvy K1
 

if by that you mean off a 2000 sv650s then it is not what i am looking for m8

Re: Need bits lots of bits sv650 2002 curvy K1
 

That's the one, other than that they work fine :).