![]() |
Lots of Injected SV Bits
Hey all, as the Minitwin will be gone soon Ive had a clear out of all the bits Ive taken off bikes in the last 3 years. I will update this as I find other stuff. All the stuff is fully working but has varying degrees of beauty :D I'm not listing the condition of everything so PM me and i'll describe it as I go, but everything does work!
OE Chain Guard Front Sprocket Cover K6 HT Leads+Coils (SOLD) Rear Brake Fluid Resevoir x2 Naked Master Cylinder + Lever (SOLD) Lower Subframe Triangle Covering Panels K5 Red Rear Grab Rail Fuel Filler Cap With Bent Key Throttle Bodies Naked Top Yoke (Provisionaly SOLD) Horn (SOLD) Speedo Drive Indicator (SOLD) Orange Indicator Lense Front OE Hoses Side Stand Faired Mirror Mounts Suspension Linkage Silver Swingarm Engine Clutch Cover + Water Pump K5+ Loom Airbox x2 OE Air Filter x2 K6 RHS (killswitch) Switchgear Radiator Fan x3 (1x SOLD) Snow Plow Bent Forks (may be able to be rolled straight) Preload Adjusters Upper Fairing Side Mounts Pillion Pegs Seat Release Mechanism K4 Undertray/Battery Box Throttle Cables Throttle Tube Housing And A GPR Steering damper but it needs a good service. Keep your eyes for more stuff peeps. :-) And to keep the mods happy every item is priced at £1,000,000 but make me a sensible offer and its yours. Ta. :cool: |
Re: Lots of Injected SV Bits
hey you wouldnt happen to have any linear springs or a rear aftermarket shock?
if so info please thanks |
Re: Lots of Injected SV Bits
Nope, sorry mate. Only whats listed here.
|
Re: Lots of Injected SV Bits
PM'd reference steering damper!!
|
Re: Lots of Injected SV Bits
I'll offer you three hundred thousand pounds for the snowplough, but I've only got a Nigerian bank draft for five hundred grand. You have to deposit the 200k difference back into my account, when it's there I'll give you the address to send the snowplough to, and I'll send you the draft. Deal?
|
Re: Lots of Injected SV Bits
Oooooh tempting, how could anyone refuse such an offer?
Or A fiver plus whatever the P&P is :-) |
Re: Lots of Injected SV Bits
How much for the naked top yoke?
|
Re: Lots of Injected SV Bits
Is the Naked master cyclinder and lever the intergrated one, not the seperate one like the S model?
|
Re: Lots of Injected SV Bits
Quote:
|
Re: Lots of Injected SV Bits
Quote:
The filler cap on this has a scratch on it and the ball on the lever is scratched but as I said in the ad it all still works perfectly. Hope this helps. Chris. |
All times are GMT. The time now is 11:25 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.