Battery relocation
 

Does anyone know where they screw the aluminium battery box into when relocating it to the front right hand side where the expansion bottle is?

Re: Battery relocation
 

I don't have a clear picture of it, this is the best I have
http://www.fastdruid.co.uk/albums/SV...80DSC05559.JPG

Essentially I shaved ~1mm or (whatever the thickness of the battery box was) off the engine mounting spacer and then the other end fits between head and rad.

I also mounted the solenoid into the battery box and shortened both leads[1] along with rewiring the bike to move everything round, CDI is now under the front subframe along with fuse box, RHS switch gear is still on the original connector so that if it gets smashed I can just buy/borrow a replacement rather than have to rewire something.

Druid

[1] Although from memory it made <100g difference, you may not want to bother ;-)

Re: Battery relocation
 

The reason I'm doing it is to use a CBR1000RR tail fairing nothing to do with weight saving just want it to look nice :)

Re: Battery relocation
 

I meant the shortening of the wire saved 100g! If you're not bothered leaving the existing wiring loom in place and just a longer earth and power lead is far easier.

Druid

Re: Battery relocation
 

I'll be zip tying it to a lump of metal on the frame cant be bothered to shorten it.

Thanks for the pictures they really help

Re: Battery relocation
 

Lol, yes I got a bit anal on that, shortened all the leads, melted the soldered ends, prised open the terminals, shortened them all, re-clamped and resoldered! Then mounted the solinoid in the battery box, re-using the original bracket that used to bolt to the frame.

Druid

Re: Battery relocation
 

Yes I saw the wiring you did for the clocks it was impressive!!