![]() |
HELP QUICK! Closed brakes
I've painted my wheel, and whilst trying to slip the brake disk into the caliper, I find that the pads have shut together tight..
How can I separate them? (I have Enhanced Rider Training on Wednesday, and I don't fancy cancelling! Help, please!) |
Re: HELP! QUICK! Closed brakes
Shove them back with your thumbs, you may need to open bleed nipple to do this. If you can't do it by thumbs with the bleed nipple open your calipers need cleaning out IMO
|
Re: HELP! QUICK! Closed brakes
Thin screw driver then proceed onto bigger screw drivers
HTH :thumright: |
Re: HELP! QUICK! Closed brakes
Holdup- Still recommend bleeding? Or is it avoidable?
|
Re: HELP! QUICK! Closed brakes
If you must do that then a) wipe the grease off the screwdriver first and b) be gentle otherwise you'll gouge gret chunks out of the pad
|
Re: HELP! QUICK! Closed brakes
Quote:
|
Re: HELP! QUICK! Closed brakes
or i've found going between the caliper and back of the pad not contacting the pistons can work too. Can you remove the shims to give you that bit more room as a temporary fix?
|
Re: HELP! QUICK! Closed brakes
Brake pad retractors? http://cgi.ebay.co.uk/Draper-Brake-C...13c353ffff92e5
Apparently if you use the above draw some fliud out of the reservoir to leave space for that forced out of the caliper. Stick a thin metal thingy between them and wiggle? If you do this it might be worth opening the bleed nipple, though this will mean rebleeding the bleeding things. Try to not force things and destroy your pads, but maybe a new set of pads will speed things up if you do wreck 'em. Good luck! |
Re: HELP! QUICK! Closed brakes
Whatever you do make sure the volume in the res. is still adequate. Usual mistake is to top res. up then a month later fit new pads and wonder why they are locked solid!
|
Re: HELP! QUICK! Closed brakes
Carternd those pad retractors look interesting. Have you or anyone else used them?
Allan how comfortable are you bleeding the brakes if you have to? |
All times are GMT. The time now is 05:36 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.