SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   For Sale - SV's and SV related items (http://forums.sv650.org/forumdisplay.php?f=113)
-   -   Pointy sv650 front end (pretty much complete) (http://forums.sv650.org/showthread.php?t=151719)

Dave20046 17-05-10 06:53 PM

Pointy sv650 front end (pretty much complete)
 
From a silver k3 sv650s, covered approx 25k miles by two forummers (no other owners), no crashes.

  • Wheel ( i.e bearings,seals,discs included) Straight with no dints as far as I'm aware. . £60.
  • [B]discs[/B]seem to have plenty of meat on, no rattles and I was using them happily right up until removal of front end so not aware of any issues with them. Bit of surface rust on them (rivets) otherwise look fine to me. (pics below :-the marker pen will come off on first use, it's just so you know which side they've come off in case it matters). £35
  • Spindle £5
  • Silver Mudguard Bit of a scratch on the front other wise I'd describe it as good condition. Comes with 'essential' fender extender to keep your spark plug sparking. £55
  • Callipers- Will double check the condition but these were serviced less than 1000 miles ago with brand new seals (costing around £40 alone). May be a couple of marks on the tops of the pistons (but not where it'll touch the seals) will double check/get photos. Can include used pads. £60
  • Standard Clip-ons - £25
  • [B]Top and bottom yokes[/B] (including stem and bearings...will have to check they're complete though if you intend on reusing them) few marks on the top yolk and a bit of paint flaking from keys, bottom yokes ok; still has rubber flap to protect bearings from crap attached. - £40
  • Forks - new hagon synthetic oil in about 4000 miles ago (less than a year) not sure if it's due but tbh for the sake of £10 I'd change it at this point if I was you - for additional moneys I can do this for you. Also complete with hagon progressive springs (same mileage as oil) - can revert to standard but would advise against this! Bit of corrosion on the fork lowers but I wouldn't say it was unsightly. £120
  • Front speedo sensor- good condition, £10
  • Brand new EBC HH Sintered pads - £45 the complete set (2 {front}callipers worth), these are brand new in sealed ebc packaging bought from a local shop.
Pictures and possibly slightly more detail to follow (snowed under!)
Advertising here before ebay with the intention to benefit forum members...but as such I'm hoping to avoid the nob heads ebay attracts so please don't waste my time :) all sold as seen at decent prices (I believe), all prices exclude postage.

Hornstar 18-05-10 07:27 AM

Re: Pointy sv650 front end (pretty much complete)
 
PM'ed

xXBADGERXx 19-05-10 02:29 PM

Re: Pointy sv650 front end (pretty much complete)
 
Oooh front Speedo Sensor , does this include the magnetic rotor bit inside as well , dibs

Dave20046 19-05-10 05:06 PM

Re: Pointy sv650 front end (pretty much complete)
 
Sorry the front speedo sensor is just the rotor/spacer from the front wheel and about 10cm of wire coming away from it.

Hornstar 20-05-10 08:18 PM

Re: Pointy sv650 front end (pretty much complete)
 
Dave did you get my PM about the forks and yokes?

Dave20046 21-05-10 06:16 PM

Re: Pointy sv650 front end (pretty much complete)
 
Quote:

Originally Posted by Hornstar (Post 2273867)
Dave did you get my PM about the forks and yokes?

Hi mate,
Sorry I did, I was waiting until I had time to get you some pics before I messaged back (turned out the weekends my first opportunity - sorry).

Hornstar 23-05-10 01:53 PM

Re: Pointy sv650 front end (pretty much complete)
 
Ok cool.

Def want to sort out a deal for the forks yokes and clipons so if you could PM me back then hopefully we can sort something out re pics and payment etc.

Cheers mate.

Hornstar 27-05-10 05:11 PM

Re: Pointy sv650 front end (pretty much complete)
 
Hey man,

Just wondering whether there is any progression on getting these parts.

Desperate to sort out this front end and get on with riding it. PM'ed you a couple of days ago with my email addy.

Cheers.

Dave20046 27-05-10 06:42 PM

Re: Pointy sv650 front end (pretty much complete)
 
http://i243.photobucket.com/albums/f...e/e280c9f1.jpg
http://i243.photobucket.com/albums/f...e/d0bf947f.jpg
http://i243.photobucket.com/albums/f...e/0ebb2e11.jpg
Quote:

Originally Posted by Hornstar (Post 2280196)
Hey man,

Just wondering whether there is any progression on getting these parts.

Desperate to sort out this front end and get on with riding it. PM'ed you a couple of days ago with my email addy.

Cheers.

PMing back.

Dave20046 29-08-10 06:04 PM

Re: Pointy sv650 front end (pretty much complete)
 
Still got calipers and brand new HH pads.


All times are GMT. The time now is 05:00 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.