SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   For Sale - SV's and SV related items (http://forums.sv650.org/forumdisplay.php?f=113)
-   -   bar riser kit for pointy svs (http://forums.sv650.org/showthread.php?t=161024)

cully 31-12-10 02:31 PM

bar riser kit for pointy svs
 
does anyone want to convert their 650s from the clip-ons to bar risers?
i bought mine with the kit already fitted but i want it converted back to clip ons

its made by abm and i want to swap it with the top yoke and clip ons from a black pointy (k5 onwards) plus cash my way depending on condition of the items being offered.

here is the kit

i am located in north yorkshire about 5 miles from colne (end of the m65)

danf1234 31-12-10 02:40 PM

Re: bar riser kit for pointy svs
 
You probably find your throttle cables will be too long, and also the front brake lines will be too long as well.

The kits come with brake lines, Throttle cables, grips bar ends, ignition spacers. It's not just a case of taking the ABM Yoke and bars off and swapping them.

cully 31-12-10 02:48 PM

Re: bar riser kit for pointy svs
 
poop :(

i have no problem stripping the lot off though.. as long as any potential 'swapper' is willing to do the same

danf1234 31-12-10 03:20 PM

Re: bar riser kit for pointy svs
 
Quote:

Originally Posted by cully (Post 2449659)
poop :(

i have no problem stripping the lot off though.. as long as any potential 'swapper' is willing to do the same

That could be your problem. The throttle cables are a pig of a job. Come to think of it so were my brake lines!

davethetrike 02-01-11 10:46 AM

Re: bar riser kit for pointy svs
 
Can probably work this, I have a black k7. Only problem is I'm east Sussex. Could be organised though as mine is laid up for the winter at the mo.

cully 02-01-11 01:17 PM

Re: bar riser kit for pointy svs
 
sorry fella... i think sussex is just a little too far away mate.
i would rather deal with someone a little closer otherwise we will be getting into the realm of couriers etc and then that will open a can of worms regarding who sends their bits first... what if something gets lost in transit etc etc
i may go down the route of buying the bits on ebay to sort mine then sell my conversion kit afterwards if i dont get any joy on here :-)

davethetrike 02-01-11 01:35 PM

Re: bar riser kit for pointy svs
 
'k :)

nikon70 28-01-11 04:58 PM

Re: bar riser kit for pointy svs
 
i would buy it if you convert back.

cully 07-02-11 01:09 PM

Re: bar riser kit for pointy svs
 
sorry.. my laptop has been playing up so i have not been on here for a while.
i am in the process of sourcing the bits off ebay to convert it back and i will repost the kit here in the for sale section when it is available

i did think i would get more takers for a swap but obviously i was wrong :-)

cully 13-05-11 06:33 PM

Re: bar riser kit for pointy svs
 
i know it been a while but i have sourced and fitted the standard clip ons and top yoke back to mine (finding a decent priced one from a breakers proved more difficult than i had first envisaged)

so..... my kit is for sale

£100 delivered, no need for longer throttle, just a reroute was done on mine but you will still need longer brake lines (a good excuse to get them braided lines you have always promised yourself)
just a reminder for those who dont want to scroll back to the top.... its the ABM comfort handlebars and machined top yoke for the pointy sv650

thanks for looking


All times are GMT. The time now is 04:59 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.