Anyone got a Haynes for a 2000 1.8 Zetec Focus?
 

Just want to know the torque settings for the wheel nuts (85nm seems to be what's coming up on google) and tyre pressures front and back. It's a five door hatchback.

Ta

Re: Anyone got a Haynes for a 2000 1.8 Zetec Focus?
 

i do an will look when im home unless some one beats me too it!

Re: Anyone got a Haynes for a 2000 1.8 Zetec Focus?
 

No, but IIRC, the tyre pressures are on a sticky label stuck on the inside of the filler cap flap. If not, then they'll be on the inside sill of the drivers door. On the B Pilar.

Re: Anyone got a Haynes for a 2000 1.8 Zetec Focus?
 

Ta daaaaaaaaaaaaaaaaaaaaaaaaa

http://www.etyres.co.uk/tyres/ford

Re: Anyone got a Haynes for a 2000 1.8 Zetec Focus?
 

as per haynes:

tyres are both 32psi front rear (2.2bar)

torque 85 nm or 63 lbf

Re: Anyone got a Haynes for a 2000 1.8 Zetec Focus?
 

Cheers guys

Re: Anyone got a Haynes for a 2000 1.8 Zetec Focus?
 

worked at fords and always tightened all wheel nuts to 100nm
for tyre pressures if unsure always go 30psi for a safe bet (normal family size car)

Re: Anyone got a Haynes for a 2000 1.8 Zetec Focus?
 

Not killed off the H*nda playing "The Fast and the Furious" have you mate?

;)

Re: Anyone got a Haynes for a 2000 1.8 Zetec Focus?
 

Nope... And I still maintain it takes a lot of skill and effort to drift a front wheel drive car, and even more effort to get it pointing in the correct direction again

Re: Anyone got a Haynes for a 2000 1.8 Zetec Focus?
 

Bit less skill required to forget which corner you're at less than half a mile from home...;)