SV650.org - SV650 & Gladius 650 Forum
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)
-   -   DataTool S4 Parts - where from? (http://forums.sv650.org/showthread.php?t=161861)

turnerj_2001 22-01-11 03:06 PM
DataTool S4 Parts - where from?
 
Hi Everyone,

Right so i've been working on my bike and whilst putting everything back together I have now lost a small part of my alarm.

for those who have them fitted I believe it could be either the ground or the motion "nudge" sensor. It's a tiny box shape that was screwed in on the metal under my pillion grab handle with 2 wires coming out of it.

I rang up the place where i got it fitted but they have advised me to go to Datatool and suprise suprise no number just a stupid contact us thing.

Does anyone know if i can get a spare one. Checked EvilBay and cannot find anything unless i buy a whole kit (No Ta)

Cheers

JT

B1k3R 22-01-11 03:19 PM
Re: DataTool S4 Parts HELPPPP
 
It sounds like the trigger switch. You can get a new one from Datatool.

turnerj_2001 22-01-11 05:02 PM
Re: DataTool S4 Parts HELPPPP
 
1 Attachment(s)
Quote:
Originally Posted by B1k3R (Post 2466426)
It sounds like the trigger switch. You can get a new one from Datatool.
The only pic i could possible find for it was this. Its the little thing square box on the bottom left. If that is deffo the trigger switch thats brill and can get a new one.

B1k3R 22-01-11 05:57 PM
Re: DataTool S4 Parts HELPPPP
 
I can't see from that picture.

TSM 22-01-11 06:29 PM
Re: DataTool S4 Parts HELPPPP
 
its a standard magnetic switch for the rear seat, any NO type is ok
motion sensor is within the alarm itself

turnerj_2001 23-01-11 07:43 PM
Re: DataTool S4 Parts HELPPPP
 
Quote:
Originally Posted by TSM (Post 2466508)
its a standard magnetic switch for the rear seat, any NO type is ok
motion sensor is within the alarm itself
I take it that i can get a new one from Datatool aswell. Soo Annoyed i lost my original one. Stupid question but what do you mean by NO type is ok????

Sorry im new to all of this.:stupid:

Teejayexc 23-01-11 08:14 PM
Re: DataTool S4 Parts HELPPPP
 
Quote:
Originally Posted by turnerj_2001 (Post 2467218)
Stupid question but what do you mean by NO type is ok????

If you'd like to turn something OFF when the two halves of your switch are apart, buy the NORMALLY-OPEN (NO) type; to turn something ON when the two halves are apart, buy the NORMALLY-CLOSED (NC) type, and yes Datatool should sell 'em.

yorkie_chris 23-01-11 08:54 PM
Re: DataTool S4 Parts - where from?
 
Are you sure? In pic the box (no wires coming out of it) looks more like the magnet than the magnetic switch

TSM 23-01-11 09:17 PM
Re: DataTool S4 Parts - where from?
 
Quote:
Originally Posted by yorkie_chris (Post 2467280)
Are you sure? In pic the box (no wires coming out of it) looks more like the magnet than the magnetic switch
Quote:
for those who have them fitted I believe it could be either the ground or the motion "nudge" sensor. It's a tiny box shape that was screwed in on the metal under my pillion grab handle with 2 wires coming out of it.
this is what he wrote

yorkie_chris 23-01-11 09:20 PM
Re: DataTool S4 Parts - where from?
 
My mistake sorry.

I may have one on an old loom actually.


All times are GMT. The time now is 07:47 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.