Problems dimantling rear caliper.
 

Its almost MOT time once again and my baby needs a little work doing to her. Last year's MOT stated that the rear brake pads were worn so I thought that it was time to put a new pair on. So its time for a bit of TLC ie. remove said calliper and replace seals if needed. Its only 4 bolts how hard can it be,,,,,,,,,. BLOODY IMPOSSIBLE that's how hard! All but one bolt looked totally fine but the last one (the one closest to the rear wheel) looked for want of a better word, shabby :( Time to perchace a new impact driver coz I didn't want to do any more damage. BANG, BANG, OUCH, BANG,[-o< *******!!!:smt019 round and round we go, big nothing will fit in this allan bolt again. Time to cut a groove in what's left of the head so I can use a screw driver bit. BANG, BANG, OUCH, BANG, BO@@LOX. Got a big s shaped driver bit now,,,,hmmmm. A good friend of mine has a workshop with everything in it, so of I go and try and bribe him with a nice bottle of wine and a chat. He say's "we could weld an old allan key in the hole and heat will help move things along" BUZZ, BUZZ, SPARK, SPARK,[-o< dink! :smt019 it just wont hold. Drill the head off then we can dismantle it and get a good grip on the thread (what's left of it). Not a snowballs chance in hell :smt072. So I go to http://www.svspares.com/ and order one from them today. So now I am off the road for as long as it take's the people of http://www.svspares.com/ to get the part to me. I will let you know what happens.

Re: Be aware of ham fisted bodgers!
 

Heh, see if you'd had a look on here first you could have soaked it in plusgas for a while and avoided all this fuss :-P

Re: Be aware of ham fisted bodgers!
 

I take it this is a Curvy you're working on? - if yes there's a thread on here, (by yours truly), detailing how to get the socket bolts out without breaking anything.

Re: Problems dimantling rear caliper.
 

should have checked here first mate:(-there's a fela on here who does rear calipers fully serviced for £45 delivered and £55 with new pads and you'd have had it 1/2 days;)

Re: Problems dimantling rear caliper.
 

Oh bugger. Well £57 from svspares ain't to bad, I all ready had the pads anyway seeing as that was what I was trying to do in the first place. So now its just a point of sitting on my hands till it turns up. Yes Sid it is a curvy. yorkie_chris please don't take the widdle out of the newish guy. I have been on here for a about a year now and the forum has helped me out a lot. I mean come on just how hard can it be to change pads? I can tell ya,,,,,,,, a right pain the rear that's how hard :(

Re: Problems dimantling rear caliper.
 

I know mate I've had all the same crap myself and more, busted knuckles, rounded bolts, snapped ones, threaded ones, wrecked parts, melted parts, on fire parts, welded-to-the-wrong-thing parts, on fire body parts etc. etc. it's how you learn unfortunately.
But if you think that's going to stop me taking the widdle you've got no chance :smt082

I reckon you'd have a good chance of drilling it out myself. File it flat first, center pop it and start with a small drill. If center pop isn't absolutely c*ck on then file it flat again and try again. You can do this with a hand drill and a couple of drill bits (buy dormer ones not crap from B+Q).
Worth a try for sake of good practice and if you scrap the part no big deal.

Re: Problems dimantling rear caliper.
 

You don't work for www.svspares.com do you!

Re: Problems dimantling rear caliper.
 

No sam I don't work for them, but if they are crap and muck me about,,,,,, every one will know :D. Yorkie, I think I have more scabs than skin on me hands now so I know what you mean. I will try your ideas out when I get the other one from you know whom,,,, shhh,,, don't mention there name. At least that way I will have a spear one :)

Re: Problems dimantling rear caliper.
 

You missed out; Bent fork parts

HTH ;)

Re: Problems dimantling rear caliper.
 

+1 to the above plus I learnt that welding in slippers isn't a good idea