SV650.org - SV650 & Gladius 650 Forum

Page 1 of 2

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- Idle Banter (http://forums.sv650.org/forumdisplay.php?f=116)

- - Hi all (http://forums.sv650.org/showthread.php?t=165158)

fatget

15-04-11 11:09 AM

Hi all

1 Attachment(s)

Ayup, did'nt realise I should've said hello in here before i posted elsewhere...so, hello all. I have just bought a k2 650, lovin it so far :)
Here it is, a few jobs planned for it, rimtape is coming straight off, and planning on fitting some fatbars, but leaving the fairing on, i take it i will need to get new cables for this ? or will the standard ones re-route ?

metalangel

15-04-11 11:29 AM

Re: Hi all

Hello and welcome! Gorgeous bike.

maviczap

15-04-11 11:37 AM

Re: Hi all

Hello and welcome

Lovely curvy you have there.

Say hello here too, as you're one of us

http://forums.sv650.org/showthread.p...40613&page=320

maviczap

15-04-11 11:38 AM

Re: Hi all

Quote:

Originally Posted by fatget (Post 2520671)

Here it is, a few jobs planned for it, rimtape is coming straight off, and planning on fitting some fatbars, but leaving the fairing on, i take it i will need to get new cables for this ? or will the standard ones re-route ?

You will probably need cables from the naked SV

toxic

15-04-11 11:42 AM

Re: Hi all

You'll need a naked top yoke, cables and hoses wll be ok if you it low rise bars, otherwise you'll need stuff from the naked model.

fatget

15-04-11 11:44 AM

Re: Hi all

Quote:

Originally Posted by maviczap (Post 2520689)

Hello and welcome

Lovely curvy you have there.

Say hello here too, as you're one of us

http://forums.sv650.org/showthread.p...40613&page=320

Done ;) there's some sweet lookin sv's on here...

fatget

15-04-11 11:46 AM

Re: Hi all

Quote:

Originally Posted by maviczap (Post 2520689)

Hello and welcome

Lovely curvy you have there.

Say hello here too, as you're one of us

http://forums.sv650.org/showthread.p...40613&page=320

Quote:

Originally Posted by toxic (Post 2520699)

You'll need a naked top yoke, cables and hoses wll be ok if you it low rise bars, otherwise you'll need stuff from the naked model.

cheers, i have low rise renthal fatbars and risers, i was gonna drill the standard yoke, being a tight yorkshire man, i wanna do it on the cheap :rolleyes:

JamesMio

15-04-11 12:02 PM

Re: Hi all

I see you've bought not only the right shape, but also the right colour of SV. Excellent work, welcome aboard!

fatget

15-04-11 12:06 PM

Re: Hi all

Quote:

Originally Posted by JamesMio (Post 2520714)

I see you've bought not only the right shape, but also the right colour of SV. Excellent work, welcome aboard!

yep, blackest, is fastest

toxic

15-04-11 12:28 PM

Re: Hi all

Quote:

Originally Posted by fatget (Post 2520701)

cheers, i have low rise renthal fatbars and risers, i was gonna drill the standard yoke, being a tight yorkshire man, i wanna do it on the cheap :rolleyes:

I have a naked yoke, surplus to requirements, yours for £30. No risers though.

All times are GMT. The time now is 08:10 PM.

Page 1 of 2

Show 40 post(s) from this thread on one page