Parts List - where?
 

Hi, trying to identify the fairing bracket I am looking for in wanted. Could do with a parts list to identify / part number if I have to buy from stealer. Sure someone has mentioned one before but have searched site and cannot find.

Re: Parts List - where?
 

Pointy or Curvy? If pointy PM me your email addy and I'll send you a copy of the parts microfiche.

Re: Parts List - where?
 

If Pointy and your'e talking about the little bracket that holds the side of the nose cowl onto the frame, below the fuel tank on either side, it's called a 'Cowl Bracket' and the part no is 94540-16G10 for the left hand side (as you sit on the bike) and 94540-16G00 for the right. You might also need 09251-04003 which is the little rubber cap which sits against the frame. If the bolt is bent or damaged, that is 01550-06123.

Re: Parts List - where?
 

SIII if its the lower faring one then forget it you cant buy them separate m8. you have to buy the kit. if it is the lower fairing bracket how bad is the one you have?

Re: Parts List - where?
 

Its the bracket 1/2 way down the fairing lowers. like 1/4 circle in shape, tube, with large circle plate on end that you bolt the crash bungs to. Suspected they come with the lowers fitting kit but hopefull some one who has naked'd their's has one kicking about.

Mines has bent and split where the tube is welded to the mounting into the frame.

Anybody got one?[-o<

Have pm'd you Ralph, yes it is a pointy.

Re: Parts List - where?
 

I think you mean this

Cheers Mark.

Re: Parts List - where?
 

Had a look on there and still cannot find:confused:

Must be a part of the lowers - thats the one with no picture of lowers or fitting kit!:mad:

Re: Parts List - where?
 

Yes, I think the bracket you're after is part of the aftermarket lowers, so won't be on the fiche I have sent you. It's not something you can see I assume, can you fabricate one?

Re: Parts List - where?
 

Can't see and doing its job, but I know its cracked.:rolleyes:

Re: Parts List - where?
 

I've got various parts from a fitting kit, both lower rear mounts are fine, one of the big main ones is slightly bent, could probably do with getting straightened. Both could do with a repaint.

PM me if interested. You dont appear that far away either...