Loose tail unit.
 

sv650x - noticed the tail was a bit loose on the left hand side so had a look under the seat cowling.

http://img859.imageshack.us/img859/5171/imag0090c.jpg
Haynes manual says first step for removing the seat cowling is to remove two screws as per above. Neither were there.

http://img197.imageshack.us/img197/7332/imag0089pm.jpg
This looks to be the main problem - anyone know what's supposed to be there?


http://img809.imageshack.us/img809/8607/imag0091k.jpg
Lastly, does any of this need to be worried about? Thanks!

Re: Loose tail unit.
 

Only a bit of rust, mines similar, can take it off and get powdercoated if it really bothers you

Re: Loose tail unit.
 

Mine was like that too no problem structurally but I took it down to the powdercoaters who sorted it and the torque arm out for only £40.

Re: Loose tail unit.
 

Thanks both. Was only worried if it was structural - will maybe do something about it after summer.