![]() |
K3 Sv650s, stunning bike, High spec!
Making a fresh ad after modifying the bike. For sale is my K3 Sv650s, the bike has been stripped back to bare frame and rebuilt using some of the best and most expensive modifications i could find and the result speaks for itself.
Advertising at £2750 ovno to people on the forum. An absololute bargain as i bought the standard bike last august for £1800 and have literally spent a couple of grand on it getting the way I want it but sadly the need for a car forces me to sell just when i was about to enjoy it! You couldnt buy a K3 onward sv and modifiy it to the same standard for that price!! The basics are the bike has 22201 miles, tax til july 31st, and mot till the end of next month. Although i will try and get it on a fresh mot before it sells, shouldn't be hard as everything is new, pads, tyres, lights ect. Comes with lots of service history, and two genuine keys that fit all locks, It also includes a standard can, pillion seat and pegs, and a scottoiler if you want it! A quick summary of the modifications include; Gsxr 600 k5 front end Gsxr 1000 K5 rear shock absorber Gsxr 600 K8 rear wheel and spacer kit, (much lighter setup than standard) 520 x ring gold chain 520 pitch front and rear gold Talon sprockets R&g crash sliders and bar ends, and tail tidy Colour matched lower fairings and seat cowl with infills Puig Db windshield Powdercoated main frame and sub-frame Goodrich braided brake lines Pirelli Supercorsa tyres with lots of tread. Suzuki sv gel seat Scorpion oval exhaust, dome capped and stubbied. High level exhaust link pipe Ermax rear hugger (rattle can paint job) Smoked tail light Oxford mini rear indicators K&N air filter Theres plenty more and i can email the full modification list to anyone thats interested! The only bad points on the bike are that the front rotors are slightly warped so judder when slowing from high speed but still usable. Also needs a speedo drive, i have all parts just havnt got round to it, will try and fit during the week, and the the battery tray could do with finishing of but still doesnt cause a problem, oh and a small dent in the tank that doesn't really show in pics and just being honest. http://forums.sv650.org/picture.php?...pictureid=5614 http://forums.sv650.org/picture.php?...pictureid=5615 http://forums.sv650.org/picture.php?...pictureid=5616 http://forums.sv650.org/picture.php?...pictureid=5617 http://forums.sv650.org/picture.php?...pictureid=5618 http://forums.sv650.org/picture.php?...pictureid=5619 http://forums.sv650.org/picture.php?...pictureid=5621 http://forums.sv650.org/picture.php?...pictureid=5622 http://forums.sv650.org/picture.php?...pictureid=5623 http://forums.sv650.org/picture.php?...pictureid=5624 http://forums.sv650.org/picture.php?...pictureid=5625 Viewings easily arranged, bike located in Folkestone kent, Text or phone 07752151810, Sensible Offers welcome, Could ride to next owner as im still insured if you pay fuel cost ect. Thanks for looking. |
Re: K3 Sv650s, stunning bike, High spec!
Uh just had a special moment and posted in the wrong category, any chance of getting this moved?
|
Re: K3 Sv650s, stunning bike, High spec!
Just to add, ive since fitted a after market digital speedo (Designed for a push bike) but works fine and displays speed, trip, odometer ect. Went by the local MOT garage earlier and they said it would be fine with that fitted. I will try and get it booked in for a fresh Mot before it sells if time permits.
|
Re: K3 Sv650s, stunning bike, High spec!
What's wrong with the one already fitted?
|
Re: K3 Sv650s, stunning bike, High spec!
Think you might have trouble selling it without an RPM display
|
Re: K3 Sv650s, stunning bike, High spec!
Fancy selling your lower fairings ;)
|
Re: K3 Sv650s, stunning bike, High spec!
Everything about the instrument cluster works, Rpm, temp, low fuel, low oil, high beam ect except speed/trip as currently no drive is fitted. When you do a Gsxr front end swap you can no longer use the sv speedo drive as it doesn't fit. You can however use a hall effect sensor spliced into the sv speedo drive cable and mounted somewhere close to the brake disc then use four round magnets usually glued into the brake disc to make it work. I haven't had the time to source all parts and put one together so for the time being ive installed a quick to fit wireless bike speedo!
And sorry the lower fairings stay, only just got them sprayed up last week lol!! |
Re: K3 Sv650s, stunning bike, High spec!
I'm sure you can just stick the original on the back wheel
|
Re: K3 Sv650s, stunning bike, High spec!
I would have put the sv speedo drive on the rear axel but since fitting the k8 gsxr rear wheel and spacer kit theres no longer room so it will have to be the hall effect sensor mounted by the brake disc, or maybe the same setup as the sv1000?
|
Re: K3 Sv650s, stunning bike, High spec!
Reduced to £2650, A bargain at this price, try and find one as heavily modified for the same price?
Bearing in mind the Gsxr front end cost around £500, k8 Gsxr rear wheel cost £200, rear shock £65, 520 pitch x ring gold 120 chain and gold talon sprockets £120, High level link pipe £65 Lower fairings £80 then £165 to be professionally Colour matched to YAV ( burning copper ) Puig DB tinted screen £66 Tl1000 50mm clip ons £35 Seat cowl and infills ( rare in copper colour ) £70 K3 frame and subframe powder-coating £137 R&G full fairing crash protectors, and bar ends £118 These are just some of the modifcations and not to mention I had to buy the bike standard for £1800 in the first place, you quickly get an idea of how much this bikes actually worth. Viewings still easily arranged, This has to sell! |
All times are GMT. The time now is 09:07 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.