Scottoiler fitting Wolverhampton - Walsall area
 

Just ordered a scottoiler for my new SV650s but as a newb want it fitted correctly, can anyone recommend a decent garage in Wolves - Walsall area that ain't gonna charge extortionate labour costs..?

Cheers

Re: Scottoiler fitting Wolverhampton - Walsall area
 

Nah you can do it yourself, really isn't a big deal. I fitted mine in my back seat, ran the pipes round pretty loose with a few cable ties here and there and down the swing arm. Might drill and tap a more permanent fixture at some point. If you have any questions, people on here will be happy to help.

Re: Scottoiler fitting Wolverhampton - Walsall area
 

I used a jubilee clip and b&q mending plate to fit mine, easier to fill up.

Gonna connect a windscreen washer container up under the passenger seat next to act as a larger resrvoir, i may relocate it then.

http://i19.photobucket.com/albums/b1...e/DSCF4277.jpg

Re: Scottoiler fitting Wolverhampton - Walsall area
 

if its a pointy I made a guide while I was fitting mine, may not be the absolute best way of doing it, but works well on my bike

http://www.youtube.com/watch?v=HoebSzLQ_f8

Re: Scottoiler fitting Wolverhampton - Walsall area
 

The tutorial's good, but i want it fitted so you can hardly see the tubes, dont fancy seeing cable ties on the outside if possible

Re: Scottoiler fitting Wolverhampton - Walsall area
 

This is how I did mine. Still on, many miles and hours of torrential rain later, with duct tape :p