![]() |
Illfitting puig, or maybe it's just me...
I've gone and bought this Puig hugger for my sk6. It was advertised that it came of an sk8. I checked this website to see if the part no's were the same and they are. My issue is that the hugger is rubbing on the right side of my tyre...
Has anyone else had issue's like this? I was expecting a 10 minute job but it's taken most of my morning trying to adjust it were I and I'm still in the same problem Help please. |
Re: Illfitting puig, or maybe it's just me...
This will sound daft but...
Have you pinned it properly on the R/H side of the swingarm? |
Re: Illfitting puig, or maybe it's just me...
I believe I have. I don't have any instructions with but I was certain I'd be able to handle a rear hugger. I have bolted the bracket that came with it to the swing arm and the brake hose guide is on top of the bracket. Where the bracket bolts to the hugger, there is a small amount of room to to adjust the position but this doesn't make any difference.
Is it possible for plastic to warp? |
Re: Illfitting puig, or maybe it's just me...
save yourself aggro mate.
http://www.puigusa.com/descargas/PUIG8408.doc |
Re: Illfitting puig, or maybe it's just me...
Cant you adjust it from the chain side i.e, where it bolts to the swing arm by loosening the bolt moving it slightly and tightening bolt again, if you follow what i mean?
|
Re: Illfitting puig, or maybe it's just me...
at which point did they shorten the swingarm on the SV's, from 07 onwards? You may have one thats for a shorter swingarm model
|
Re: Illfitting puig, or maybe it's just me...
Naked were shorter swingarms, but Suzuki being practical cut material off the back of the swinging arm (a lot cheaper than a completely different unit)
Mounts are all the same. Along with the swingarm design since the k4 |
Re: Illfitting puig, or maybe it's just me...
What size rear tyre are you running?
|
Re: Illfitting puig, or maybe it's just me...
The designated sport models of the fully faired SV650 had shorter swingarms too..2006 onwards.
|
Re: Illfitting puig, or maybe it's just me...
Quote:
|
All times are GMT. The time now is 02:31 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.