Fitting Motrax bar ed Mirrors....Help please
 

Hi, I'm new tt bike so know very little about sticking bits on them etc.

I really don't like the look of the standard mirros and thought I'd try some Motrax Bar end ones.

Anyway, am I missing something to get them to fit? please see the pics below.
I do have spacers etc, but they obviuosly are useless.

http://i119.photobucket.com/albums/o...n/IMAG0035.jpg

As you can see, they won't fit on the bar ends, that would look rubbish anyway. When I take the bar end weight off thee is nothing there, do I need to move the grips?!?

http://i119.photobucket.com/albums/o...n/IMAG0036.jpg

Any help/links to what I need will be excellent.

Cheers,

Mark.

Re: Fitting Motrax bar ed Mirrors....Help please
 

Looks like you can gently prise them apart by putting a screwdiver in the gap to expand the clamp a bit.

A slight twist should help.

If not get a slightly longer allen bolt to give a bit more clearance in the clamp
, as that original is at its limit

Unfortunately we don't really support Motrax products on here as they are robbing barstewards

Re: Fitting Motrax bar ed Mirrors....Help please
 

Thanks for that.

I don't think I'll be able to expand it over the existing bar end, even if I could that may look a bit rubbish.

Cheers

Cramman

Re: Fitting Motrax bar ed Mirrors....Help please
 

You really need a bar end mirror that has an internal bar end fixing like these Oberons

http://www.moorespeedracing.co.uk/mo...nd-mirror.html