Will Bandit 1200 bar clamp and riser fit SV650 naked yoke?
 

I'm going to put a naked top yoke on my curvy sv650s and need to know if a 1998 bandit 1200 clamp and risers are same size. They seem to be the same I've seen in Hayes manual. I asked the seller but they don't know. Maybe I've bitten off more than I can chew with this project but I'm going to have a go!

Re: Will Bandit 1200 bar clamp and riser fit SV650 naked yoke?
 

Bandits and SVs both use 22mm diameter bars, but couldn't tell you if the Bandit risers will fit in the holes in the SV yoke

Re: Will Bandit 1200 bar clamp and riser fit SV650 naked yoke?
 

try this

E-Bay top yoke sale.

Just in case that don't work, here is the full link.

http://www.ebay.co.uk/itm/Suzuki-Sv-...ht_2937wt_1139

Re: Will Bandit 1200 bar clamp and riser fit SV650 naked yoke?
 

They're not the same parts - the Bandit has rubber mounted handlebar clamps that mount to the top yoke in a different manner, the holes in the SV yoke aren't big enough to accommodate the mountings from the Bandit, but, and it is a but, the Bandit's mounts have the same, (I think), size bolt as the SV does. This may mean the Bandit mounts could be fitted in place on the SV yoke, but they may be too short without the rubber parts and spacers, (that won't fit in the SV yoke), meaning the handlebar won't clear the steering stem nut.

You'll have to try to be certain - but I doubt it will fit.

Re: Will Bandit 1200 bar clamp and riser fit SV650 naked yoke?
 

Thanks. I'll keep looking on eBay, might get lucky.