SV650.org - SV650 & Gladius 650 Forum

Page 1 of 2

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - Cam identification? (http://forums.sv650.org/showthread.php?t=172919)

lawson17

21-11-11 07:19 PM

Cam identification?

Does anyone know how I can tell Pointy cams apart from curvy ones?

Thanks

squirrel_hunter

21-11-11 08:32 PM

Re: Cam identification

Hopefully this will help.

Serdna

21-11-11 08:58 PM

Re: Cam identification

Why u askin? :)

lawson17

21-11-11 09:15 PM

Re: Cam identification

Genius! Thank you squirrel_hunter!

Much appreciated!

Serdna

21-11-11 09:30 PM

Re: Cam identification

If anyone knows where i can get hold of some pointy intake cams please let on. :)

hardhat_harry

21-11-11 09:40 PM

Re: Cam identification

Suzuki sell them about £200 I believe :)

Serdna

22-11-11 08:36 AM

Re: Cam identification?

The problem is they are £200 each!

_Stretchie_

22-11-11 09:27 AM

Re: Cam identification?

Do you have them to compare next to each other? If I remember correctly the pointy cams, from base to lobe tip, are larger than the curvy one's.

Squirrell do you still have the measurements?

squirrel_hunter

22-11-11 01:54 PM

Re: Cam identification?

Stretchie, you're thinking of the shift star, not the cams.

_Stretchie_

22-11-11 03:25 PM

Re: Cam identification?

No I'm not.

We measured the cam lobes curvy vs pointy on the bench next to the far garage door at the old place.

Pretty sure we found the pointy ones are Xmm bigger thus keeping the valves open that bit longer.

All times are GMT. The time now is 09:11 PM.

Page 1 of 2

Show 40 post(s) from this thread on one page