SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Stuff Wanted (http://forums.sv650.org/forumdisplay.php?f=114)
-   -   Eccentric chain adjuster? (http://forums.sv650.org/showthread.php?t=176818)

Airsnark 28-03-12 02:07 PM
Eccentric chain adjuster?
 
1 Attachment(s)
I am looking for what i believe is called an eccentric chain adjuster, it is the tool needed to change the chain tension on a bike with the adjustment bit in the swing arm like in the attached pic.

Sy-superfly 28-03-12 03:00 PM
Re: Eccentric chain adjuster?
 
Not really 100% sure on your type, but if it's anything like my Ducati one it's basicly a c-spanner that goes over a toothed wheel just between the swingarm and wheel if it is adjusted the same way.
If not I'm stumped.

Airsnark 28-03-12 03:16 PM
Re: Eccentric chain adjuster?
 
nah this one requires something which goes over the nut and then a bit that goes into one of the other holes or a hole to allow a screwdriver to. The triumph daytona 1200 has the same thing

Airsnark 28-03-12 03:25 PM
Re: Eccentric chain adjuster?
 
1 Attachment(s)
attached is a diagram from the japanese owners manual

NTECUK 28-03-12 04:04 PM
Re: Eccentric chain adjuster?
 
Make one .Its not gona take long
or use this
http://www.dropshiponline.co.uk/prod...oducts_id=4578

Airsnark 28-03-12 04:12 PM
Re: Eccentric chain adjuster?
 
how would you suggest i make one? get a metal plate and drill 2 holes the correct distance apart?

NTECUK 28-03-12 05:03 PM
Re: Eccentric chain adjuster?
 
Square section tube.
2 bolts and 2 nuts. File the thread on the protruding prongs so the ends smooth.Then sheath the bolts so they dont scratch the adjuster.

Airsnark 28-03-12 07:57 PM
Re: Eccentric chain adjuster?
 
ok will try that soon cheers


All times are GMT. The time now is 11:48 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.