Pointy parts and a few curvy bits.
 

Hi,

I'm advertising a few bits that I have left over from my pointy after doing some upgrades. Also got a couple of curvy bits.

Advertising them here first before they go on the Bay

All prices are + postage, photos available if required.

Front pointy wheel with bearings very good condition SOLD!

Rear pointy wheel with bearings very good condition £75

Front pointy brake discs SOLD!

Front brake callipers with pads SOLD!

Front pointy brake master cylinder £25

Front pointy mudguard black with fender extender fitted SOLD!

Unrestricted ECU single plug type £50

Pillion grab rail candy napoleon blue BRAND NEW! never fitted £50

Front nose cone candy napoleon blue slightly damaged but easy repair £40

Standard front brake lever SOLD!

Standard front brake lever with small scuff marks, still intact and usable £5

Standard clutch lever £15

Short Spazzo type front brake lever black with red adjuster SOLD!

Standard headlight brackets SOLD!

Front curvy wheel does have a slight bend where the tyre bead sits £25

Rear curvy brake calliper with pads, pistons need cleaning and seals need replacing but I will chuck a seal kit in for free :) £20

Rear curvy seat unit fairings black, right and left damaged but useable £20

Re: Pointy parts and a few curvy bits.
 

Pictures of the pointy front wheel

Will post pic of the wheel first thing in the morning for you. As its at my workshop, I will be there at 8am so will put one up shortly after that :)

What nick are the front discs in?

Sent from my HTC Desire S using Tapatalk

Hi,
Very good taken from a k4 that has covered 20k miles. There is plenty of mileage left in them. Only selling due to putting a GSXR front end on.

http://img.tapatalk.com/d5cde98d-a6fb-6620.jpg

http://img.tapatalk.com/d5cde98d-a717-f7ee.jpg

http://img.tapatalk.com/d5cde98d-a726-a587.jpg

Here are some pics of the front wheel. I have just noticed a slight scuff down the side which is like a kerb mark (see pic two) It hasn't bent the wheel or anything and due to the colour is hardly noticeable. Bearings are included and are in good condition. But because of the scuff i will do it for £75 delivered instead. If you want it it's yours?

I can also have the wheel shot blasted then powder coated in whatever colour you want for £35 if you want?

Here are some pics like I said very good condition. There is no rust or pitting on the carriers. Disc bolts included. £50 + postage, they are yours if you want them.

http://img.tapatalk.com/d5cde98d-a88a-e489.jpg

Re: Pointy parts and a few curvy bits.
 

I'll leave, mines a black one, so it would look odd with a silver wheel,
Thanks anyway

Ok no worries,
I can powder coat black for you?
Would you be interested if I included that in the price?
So £75 + postage and I will powder coat it black?

Re: Pointy parts and a few curvy bits.
 

i'm after a front wheel if josh doesnt want it mate,