ignition security torx size?
 

what is the correct size for getting the barsteward off

and no im not just dremmiling it

Re: ignition security torx
 

If it's on a curvey (might be same on pointy just don't know) it's a lovely TH30 please note that they need to be a security torques (bit like the polo the one with the whole in the middle) also please note the H on the end of the T bit which means the square edged torques, I did get away with the normal but so nearly rounded off, so on your head be it if you try.
The best place to get these is from a motorfactors such as eurocar parts, ajar (Don't know what yours are called down your end) alot cheaper that halfords

Re: ignition security torx
 

or if you are lucky you can find security torx bits in TK Max for £3.99!

The VRap is covered in security torx bolts, and I don't see why I should pay Halfrauds prices when they rarely get removed!

Re: ignition security torx
 

Any good tool shop will have a box of security torx bits. So do Screwfix... http://www.screwfix.com/p/security-bit-set-33pcs/96872

Re: ignition security torx
 

Laser do a set of bit's that include sercurity torx and the like (I have a set)....about a tenner from Halfords, Machine Mart etc...depends on the ones you need.

Hmmmm, they maybe security hex heads. If you want Dave, take a photo and I'll have a look at what I have in the Garage.

Re: ignition security torx size?
 

If an SV why is this not in SV Talk?

If not an SV I think you ought to say which bike.

Re: ignition security torx size?
 

it is a sv sid

and if you want it in sv talk you move it ,thats what we pay sorry insult you for :)

Re: ignition security torx size?
 

Dave, screwfix/ toolstation or Machine Mart and get a case of security bits for a tenna