SV650.org - SV650 & Gladius 650 Forum - Fork crash bobbin fitment?

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - Fork crash bobbin fitment? (http://forums.sv650.org/showthread.php?t=180941)

Ixtana_ran

03-07-12 08:17 AM

Fork crash bobbin fitment?

Has any one ever fitted crash bungs to the front forks? Brought this set of eBay because I thought it would give better protection, http://www.ebay.co.uk/itm/SUZUKI-SV6...ht_1141wt_1139
Unfortunately I can't see how to fit the front bobbins, and after a couple of emails to the seller still no answer? Any advice appreciated.

jambo

03-07-12 08:41 AM

Re: Fork crash bobbin fitment?

Most of this type have a bar that goes through the hollow front axel as found on most sports bikes, and a nut on each end.

As the SV doesn't have a hollow axel, you'd need a replacement axel or some additional fittings I suspect, but I've not seen a set like this fitted

Jambo

All times are GMT. The time now is 09:45 PM.