SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Stuff Wanted (http://forums.sv650.org/forumdisplay.php?f=114)
-   -   Pointy parts wanted (http://forums.sv650.org/showthread.php?t=187716)

Tomor 02-12-12 03:45 PM

Pointy parts wanted
 
Hi All,

As you may have seen I had a run in with a deer yesterday.

I am after the following in k4 yellow YU9 if possible (not asking much :D ) but anything may be better than nothing.

Nose cone,
Clock surround
Radiator
Tank
Rear plastics (I may be able to diy weld these back together so not necessary)
Front fender

I think that is all for now, but may find some more bits, or if my forks are too bent to be straightened....

Thanks

Tom

phil24_7 02-12-12 06:55 PM

Re: Pointy parts wanted
 
I have some rear plastics I can look at sorting for you along with the nose cone if you like...and possibly a fender...and a clock surround!!!

Tomor 02-12-12 06:56 PM

Oooooo Phil make some space in your inbox!!!

phil24_7 02-12-12 06:57 PM

Re: Pointy parts wanted
 
Ha ha, will try to clear some space now!

phil24_7 02-12-12 07:07 PM

Re: Pointy parts wanted
 
Done!

Runako 02-12-12 07:33 PM

Re: Pointy parts wanted
 
Dude if you still need a nose assembly, I'm bidding on one at the minute starting at 99p on ebay (in silver though). You need it more than me. Here's the link - http://www.ebay.co.uk/itm/1609319820...84.m1431.l2649

Tomor 02-12-12 07:35 PM

Cheers buddy. I'll let you know Si we don't get in a bidding war :)

Runako 02-12-12 07:44 PM

Re: Pointy parts wanted
 
Yes good point. I've put a max bid of £5 at the moment. If you bid let me know and I'll quit there.

Geordie Mick 02-12-12 09:39 PM

Re: Pointy parts wanted
 
I can almost certainly do clock surround (if Phil can't help) and radiator. Rad's off an SK4, about to swap it for a naked model rad. I'll need to check it over thoroughly, though generally in good condition.

Waiting to hear back from Rokerman on nose cone, but it's blue (YHJ from an SK6) not yella.

Tomor 02-12-12 11:10 PM

Re: Pointy parts wanted
 
Pm'd Mick :)


All times are GMT. The time now is 04:59 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.