SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- Hardware (http://forums.sv650.org/forumdisplay.php?f=136)

- - Galfer braided lines (http://forums.sv650.org/showthread.php?t=191815)

str160

20-02-13 01:16 PM

Galfer braided lines

Hi all, bought some Galfer brake lines for my 2003 650s. Fitting them today, I've discovered that the double banjo bolt for the master cylinder is the wrong thread, and is different to the ones for the calipers. The thread from the originals are the same, so it's the bolt that's different...

Question is, can anyone confirm if the master cylinder is supposed to be the same or a different thread?

The master cylinder is a Nissin item if that makes any difference.

m`baubz

20-02-13 01:46 PM

Re: Galfer braided lines

master cylinder is 1mm pitch, calipers are 1.25mm

str160

20-02-13 01:47 PM

Re: Galfer braided lines

You say that, but mine are the same all round...hmmm

str160

20-02-13 06:24 PM

Re: Galfer braided lines

Further research has found the correct thread for 2003 onward is 10x1.25mm. NOT 10x1mm.

All times are GMT. The time now is 09:56 AM.