M4 Carbon High mount Full system, Power Commander 3 (mapped) and Factory Pro Velocity Stacks
 

Exhaust system, Power Commander 3 and Factory Pro velocity stacks: £730 posted, £700 collected from E3 - London.

This is the very top of the range from M4, and an imported model that you can not buy here in the UK to my knowledge.

I am selling all three parts together since the power commander is mapped to this setup. This was done with a dyno, and below you will notice the results.

The only other mod to the bike is a BMC air filter and no snorkel, so you should easily be able to replicate the results I have gotten.

I have owned the bike for 1.5 years, and used it for commuting and 2 track days. But I have found that more than track days I enjoy touring with my girlfriend, and it is hard to fit pannier bags with the highmount exhaust. I am selling the parts together because I want to fit a normal system and since I do not race I can't take advantage of the extra performance.

The full system goes through MOT since it is an import from USA, so there are no racing stamps or anything like that on it. The system does not come with a baffle, but passed MOT just fine, and noise tests at Brands Hatch and Snetterton.

http://s28.postimg.org/okcwphv0t/img20121019215231.jpg

The bike will look like this with a Highmount on. The performance is great, the sound is awesome, and the pillon pegs will fit with the special mounting brackets that come with the system.

http://s21.postimg.org/eonml6zjb/201...8_12_25_32.jpg
http://s18.postimg.org/fpykyocl5/201...8_12_25_00.jpg


http://s13.postimg.org/svdhmk3d3/M4_...ull_Carbon.jpg
You will notice that the M4 logo has been removed, I am not sure why - I bought the bike second hand so I can only guess that this was to avoid attention. The front down pipe is slightly turned on the picture because I just took it off and just casually attached it again.

http://s30.postimg.org/6qe532i01/Fac...ity_Stacks.png
Factory pro, one 70 and one 35. These are easily swapped with the standard ones.

http://s21.postimg.org/akimfhlxj/Power_Commander3.jpg
The power commander 3, with the correct map for this configuration. To my knowledge you can not find this mapping on the internet, I have looked for it myself because I wanted to try and reset it, but since I couldn't find a copy the original is still loaded.

Re: M4 Carbon High mount Full system, Power Commander 3 (mapped) and Factory Pro Velocity Stacks
 

Would you consider selling the PC3 separately?

Re: M4 Carbon High mount Full system, Power Commander 3 (mapped) and Factory Pro Velocity Stacks
 

Ditto and second dibs!

Re: M4 Carbon High mount Full system, Power Commander 3 (mapped) and Factory Pro Velocity Stacks
 

No - I would like to sell it all in one go since the exhaust and stacks don't really make sense unless you have a power commander with the right mapping, and by buying the whole thing together I save someone from having to go and pay for a dyno run.

You are welcome to buy everything and sell it off on ebay in bits - just wanted to give the org the chance first before I do that myself.

Re: M4 Carbon High mount Full system, Power Commander 3 (mapped) and Factory Pro Velocity Stacks
 

Well, my idea would be to have it on my pointy, since I've got a full Yoshi system and K&N filter, so the map would be better than what I've got now (Stock mapping), and then get it remapped.

I wouldn't buy it all and then sell it off though, too much hassle, and I've not got that much cash sitting around.

Mind you, on a Dyno my SV is reading 82hp allready...

Re: M4 Carbon High mount Full system, Power Commander 3 (mapped) and Factory Pro Velocity Stacks
 

82??

Anyways - I will have to turn down your offer.

Sent from my Nexus 4 using Tapatalk

Re: M4 Carbon High mount Full system, Power Commander 3 (mapped) and Factory Pro Velocity Stacks
 

I reduced the price to 850 posted, 820 collected.

Re: M4 Carbon High mount Full system, Power Commander 3 (mapped) and Factory Pro Velocity Stacks
 

bump

Re: M4 Carbon High mount Full system, Power Commander 3 (mapped) and Factory Pro Velocity Stacks
 

Try advertising on here:

http://www.motoforum.net/

Plenty of racers of super/minitwins on there that may be interested?

Re: M4 Carbon High mount Full system, Power Commander 3 (mapped) and Factory Pro Velocity Stacks
 

Great idea.

Thanks